1 minute ago, gcode said:

I believe someone with a dealer's sim can convert an industrial file to an educational file

THanks! The conversion needs to be the other way around though, still need a dealers sim you think?

On 1/28/2019 at 11:20 AM, Aaron Eberhard - CNC Software said:

I took a look at this file, and I don't think you're going to have success the way you've defined the faces and such.     The way this toolpath works is to figure out a sharp edge from what you give it.   Unfortunately, with just these two faces, there's more questions than answers

 

Think of this as if you had made a model with just those two surfaces (create surfaces from solid, for example).  This is what you're feeding the algorithm:

Eww.

A better way to go about it is to just select the entire model.  I wasn't sure which toolpath you were dealing with, so I just chose the last one, #20.  I unselected your two faces and just selected the whole model which gave me this: 

It looked like you were really just trying to trace the slot edges, so I chose those as my "User defined" edges:

I also set it to 3 axis, because I believe that's what you were gunning for?

As a side note, there were lots of improvements to Deburr in 2019 Update 3, so I'd encourage you to use that if it's available.    There were heaps more in 2020, so that'll be the choice once it's in public beta.    Here's 2020, all I did was open the file and regen Op #20:

 

Hope this helps!

sleeve2 - update.emcam

Hi guys, I'm encountering some issues using multiaxis deburing toolpath on 2020. Was trying to download the file you were so kind to post, but it wont let me open an educational file? any solution? thanks in advance