Have installed mastercam on my new computer. everything is fine byt posting. I got error in the logfile that says: The 'startbin' header was found but not 'endbin' I have tried to reinstall and nothing helps. Are there somone who can help me with this issue? 16 Nov 2020 06:53:31 PM - Report created. 16 Nov 2020 06:53:31 PM - Initialize posting log file 16 Nov 2020 06:53:31 PM - Using MP run version 21.00 and post components version 21.00 16 Nov 2020 06:53:31 PM - Initiate opening the post processor file(s). 16 Nov 2020 06:53:31 PM - C:\Users\Public\Documents\shared Mcam2019\mill\posts\Xilog_Plus.PST 16 Nov 2020 06:53:31 PM - An encrypted post file is associated with the post file. 16 Nov 2020 06:53:31 PM - Post processor file name: C:\Users\Public\Documents\shared Mcam2019\mill\posts\Xilog_Plus.PSB 16 Nov 2020 06:53:31 PM - The post processor file has finished the read process. 16 Nov 2020 06:53:31 PM - Initialization of pre-defined post variables, strings, postblocks was successful. 16 Nov 2020 06:53:31 PM - The 'startbin' header was found but not 'endbin' 16 Nov 2020 06:53:31 PM - Search for defined post variables, strings, postblocks failed! 16 Nov 2020 06:53:31 PM - The application has been aborted!