I already try it but didn't work, i have been talking with the staff on the company but they don't want to spend on the anual fee yet as we are having problems with low customers orders, i will keep trying to fix this myself Thanks for everyones help.

Thanks for your help, here´s the post i´m using i assumed it was a generic post that was adjusted because of the comments wrote on it but it may be as you said from some developer. The old plant that had the machine has the post that came with it but it´s used on BobCad Cam and we don´t have license for that software. DMS_5AXIS_FAGOR_8055 MOD.pst

we didn´t get it from the manufacturer, this machine was moved from a plant that was shut down last year.

I have checked that but the company decided not to pay the anual maintenance fee last year due to a budget reduction for the Covid

I have made some modifications to this post to correct some issues we use to have but i have never seen on the post a part that declares the order of the axis on the movements, this post was adcquired with the mastercam license when the first machine arrived i wasn't here on that time so i don't know who's the person who wrote this post or to who ask for help.

Hi everyone, I'm new in this community and i need your help with an issue i have, i work with a 5 axis DMS router with fagor 8065m on mastercam 2018, recently we adquire another DMS machine but it has fagor 8055m, all axes and equipment are the same and when i post works the machine can run them pretty good, but when i do 5 axis complex toolpaths sometime mastercam post the B and C axes on wrong order, in the 8065m theres no problem with that but with the 8055m the machine stops and alarms because of this, does any one know on what part of the post is declared the output format of the controled movement of axis? Right know i'm changing manually the order of the cordinates from CXXX.XXX BXXX.XXX to BXXX.XXX CXXX.XXX I will really apreciatte if someone can help me.