BGM 91
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by BGM 91
-
-
i am trying to touch off a .016 carbide reamer in our vf2ssyt with next gen controll but cant override the probing feed witch is causing the reamer to break on touch off. is there a way to adjust the feed rate witch it probes at ?
thanks
-
thanks that made it much better
- 4
-
hi im trying to swarf machine an outer profile of a part on a trunnion and i cannot get a good finish on part. the machine is trying to lock and unlock the a,b axis randomly and it dwells and leaves tool marks. there is no m10 or m12 in program. Is there a setting in the control that controls this? machine is a haas vm-6 with a tr210
thanks
-
Ok thanks for all the input
-
-
its all absolute
-
i have just upgraded to 2022 and when doing a drilling cycle on a hole that is say -.250 from top when i set top of stock to -.250 it starts pecking at Z0. is there a way to fix this?
marposs probe on haas
in Industrial Forum
Posted
hello
i have a 2008 haas tm2 with a marposs probe. is there a way to display measured size on the screen like the new haas with renshaw probes?