Badbacom
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Badbacom
-
-
Greetings, I just got Cimco up and running and I am exploring the best work flow for my situation. My CNC memory if full so ideally I was hoping to have all my programs have the same name and have the operator retrieve and send the correct program in Cimco based on the metadata / additional fields.
This would
1. Ensure the operator is only using the latest and greatest program
2. Prevent my CNC from filling up since each new program sent to the cnc would overwrite the last.
After testing my current Cimco configuration will not work like this because it stores / organizes the programs by name.
So I would ask what is the recommended workflow which achieves my goal of only using the latest version program and preventing the CNC memory from filling up?
NCI Line vs Post Block Call
in Post Processor Development Forum
Posted
I have received a copy of MP 2021 - Post Reference Guide and according to past comments here there should be a cross reference list of which NCI Lines call which Post Block, ie 1050 calls pheader$. I have looked and searched and cannot find this in any of my documentation. Any tips on what to search for in Post Reference Guide search bar? If I look at NCI 1050 I see the following but nothing referencing this is the call for pheader$.
NCI 1050
Define NCI version header
Parameter reference
Mill/Router