Cygnus1
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Cygnus1
-
-
I am using a boundry. and everything looks very typical in all the settings. I have been having issues with models from this customer. could it be a bad model. it looks and acts normal. I had issues with micro gaps in the model and surfaces being attached just weird stuff previously. The model was made in NX.
-
im running mastercam 2021 Working on an electronics encloseure. its a pretty complex part but nothing new. added a Surface high speed(Dynamis OptiRest) and its taking around 1.5 hours to regen. this is a pretty typical thing for me but its normally 1-2 minutes. oddly while regenerating there no load whatsoever on the cpu. Is there anything i can try to speed this up. any issues to look for.
I cannot share the model or any pictures its ITAR work. Watching the Multithreading manger its the calulating step up and down that take all the time. using a 1/4 em step down is 150% stet up is 50%. max depth is .75" part overall is 12" x 18"
Im open to trying anything at this point.
Computer Specs
cpu i9 9900
gpu quadro p1000
windows 10 pro
-
I use the default mpmaster post for my homemade mill and it works great. The only thing I would like to change would be for it to always post x and y on the g81 line. my controller requires it or it skips the first hole. I've never edited a post. could someone recommend a book or something to read or how to do this specific edit.
Regen times skyrocked suddenly.
in Industrial Forum
Posted
I did do that Brad St.
Could this be an issue?