I was able to download all my offsets and I am good to go.

My company is in the process of decommissioning our Mori Seiki NH4000 DCG horizontal mill and we are going to put tools offsets  machine offsets and programs in our Mori Seiki  NH4000 and put them in th NH5000 . I am new to this brand of machine and could use step by step instructions on downloading Tool Offsets machine offsets and programs from the NH4000 machine to a flashdrive  and then dropping the saved information into the NH5000. 

Need some help on my Draft settings in MasterCam 2021 I must have toggled something because when I go and create a dimension whether its verticle horizontal circular the true size dosent show up on the screen i keep spitting out .000  

I have a question when doing a Dynamic operation is there a way to start at a certain point say an existing hole or feature that is already in place or does the algorithm determine that automatically. I see there is an entry chain option so say I am bringing a .250 Dia tool in and I have a .207 Dia hole in the material  do I have to create a boundary around the hole that will accept a .25 endmill

Looking for a step file or equivalent for Chick Tombstone for Mori-Seiki NHX-5000 . Our company recently purchased  the Horizontal and want to get a jump on putting together base program. Chick doesn't seem to have support for 3D geo or prints to create GEO

Yes i use a larger stepover for Aluminum Thank you for the Info

I have predominantly used Dynamic Mill on Aluminum I have a project that is made out of 316 Stainless Steel. Looking for Suggestions on speeds and feeds I have a 3/16  & 1/8  carbide endmills  will stay with my 12 % stepover total depth are .135 size of area 1" X  .625"

Pullo that would be great Thanks

Yes we have set up sheets this would be just a step by step instruction that they could pre read to see what each tool is doing and being that I have typed it into Mastercam program and would look to save the step of having to re type it out 

Here is an example of what I would create but with programs with any surfacing or Dynamic functions it would be time consuming to strip manually

O3091(2309_1)
( XXXXXXXXXXX)
( UNPROVEN PROGRAM )
( FIRST OPERATION )
( DATE 05-18-21 TPS )
(MCX FILE - M:\XXXXXXXXX\XXXXXXXX\XXXXXXXXX\ENGINEERING\XXXXXXX.MCAM)
(NC FILE - M:\XXXXXXXX\XXXXXXX\XXXXXXXXX\PROGRAMS\XXX.NC)
(MATERIAL - .750" x .750" x 3.200" 6061-T6 ALUMINUM)
(USE KURT VISE WITH 1.500" THICK PARALLELS RUN 3 PARTS IN G54)
(T3|.1875 DIA. 3FL END MILL |H3|D3|)
(T5|.125 DIA 3 FLT FLAT ENDMILL .500 LOC|H5|D5|)
(T6|.093 DIA 3FLT FLAT ENDMILL .500 LOC|H6|D6|)
(T7|.047 BALL ENDMILL|H7|)

(T3|.1875 DIA. 3FL END MILL |H3|D3|)
(FINISH MILL TOP OF PART .725 THICK)
(FINISH MILL .450 X .130 DP COBORE 3 PLS)
(ROUGH OUTSIDE OF KNOB .410 DP 3 PLS)
(ROUGH MILL TOP OF EAR)
(ESTABLISH X0 FOR OP2 .550 DP)

(T5|.125 DIA 3 FLT FLAT ENDMILL .500 LOC|H5|D5|)
(FINISH MILL .260 X .170 DP COBORE 3 PLS)

(T6|.093 DIA 3FLT FLAT ENDMILL .500 LOC|H6|D6|)
(ROUGH MILL .128 DIA HOLE .340 DP 3 PLS)
(FINISH MILL .128 DIA HOLE .340 DP 3 PLS)
(ROUGH MILL OUTSIDE PROFILE .408 DP 3 PLS)
(FINISH MILL OUTSIDE PROFILE .408 DP 3 PLS)
(FINISH MILL PROFILE ABOVE EAR .030 DP 3 PLS)

(T7|.047 BALL ENDMILL|H7|)
(FINISH BALL MILL TOP OF EAR 3 PLS)

I am looking for a way to strip all numbers, G & M code from my program's and leave just only text between the  parenthesis  ex.  ( OP 1  )  so I can print these up and give them to Setup for help. The last place I worked had a Dos based program that did this. Is there an option in either the CIMCO or Mastercam editor that will do this ?