-
Posts
88 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by [email protected]
-
-
thanks guys i already knew that but i was woundering if i could find some thing new
-
hi guys
where can i find different g-code lists for different systems and controls
thnx
-
thank you very much adam i got it
-
the problem that i can not even download the file
-
adam i can not view the file above
-
geate guys and thank you indeed
i'll check and i'll be back
-
thank you guys for help
----------------------
What you need is a post processor to take your program and turn it into code the Heidehan.
----------------------
form where could i get these post processor? do you have some good link it would be better
-
ok thank you guy for the replay
can mastercam genarate the G-code in HEIDENHAIN
not in fanuc ? and how to adjust that
-
is there another way to do that
the macine is maho 232 and maho 432 with HEIDENHAIN control
-
hi guys
here I'm again but this time I'm asking about the ability to get a G-code from mastercam to maho machine
and I have been looking in furom for that and I've fuond that I can't connect the pc to the machine and if I want do long operation -with more than 50000 block - i have to divide the operation is there more futures for these problems
I've find alot of users using maho like CHIP , Toolfab, PIP, ... etc
I hope i could get some info to share
thanks
-
thank you g-code
i understod that i just have to apply it to the machine and there's not a simulator program
and i want you to check this if possible
PREPARATORY FUNCTIONS
G00 Rapid travel
G01 Linear interpolation
G02 Clockwise circular interpolation
G03 Counter-clockwise circular interpolation
G04 Dwell/block preparation stop
G05 Round corner
G06 Absolute arc center coordinates
G07 Square corner
G08 Arc tangent to previous path
G09 Arc defined by three points
G10 Mirror image cancellation
G11 Mirror image on X axis
G12 Mirror image on Y axis
G13 Mirror image on Z axis
G14 Mirror image in the programmed directions
G15 C axis
G16 Selection of main plane in two directions
G17 Main plane X-Y and longitudinal Z
G18 Main plane Z-X and longitudinal Y
G19 Main plane Y-Z and longitudinal X
G20 Definition of lower work zone limits
G21 Definition of upper work zone limits
G22 Activate/cancel work zones
G28 Selection of the second spindle
G29 Selection of the main spindle
G32 Feedrate “F” as an inverted function of time
G33 Threadcutting
G36 Automatic radius blend
G37 Tangential entry
G38 Tangential exit
G39 Automatic chamfer blend
G40 Cancellation of tool radius compensation
G41 Right-hand tool radius compensation
G42 Left-hand tool radius compensation
G50 Controlled corner rounding
G51 Look ahead
G52 Movement to hard stop
G53 Program coordinates with respect to home
G54 Absolute zero offset
G55 Absolute zero offset
G56 Absolute zero offset
G57 Absolute zero offset
G58 Additive zero offset
G59 Additive zero offset
G60 Axial drilling / tapping canned cycle
G61 Radial drilling / tapping canned cycle
G62 Longitudinal slot milling canned cycle
G63 Radial slot milling canned cycle
G66 Pattern repeat canned cycle
G68 Stock removal canned cycle along X axis
G69 Stock removal canned cycle along Z axis
G70 Programming in inches
G71 Programming in millimeters
G72 General and specific scaling factor
G74 Machine reference search
G75 Probing until touching
G76 Probing while touching
G77 Slaved axis
G78 Slaved axis cancellation
G81 Turning canned cycle with straight sections
G82 Facing canned cycle with straight sections
G83 Drilling canned cycle
G84 Turning canned cycle with circular sections
G85 Facing canned cycle with circular sections
G86 Longitudinal threadcutting canned cycle
G87 Face threadcutting canned cycle
G88 Grooving canned cycle along X axis
G89 Grooving canned cycle along Z axis
G90 Programming in absolute
G91 Programming in incremental
G92 Coordinate preset/spindle speed limit
G93 Polar origin
G94 Feedrate in millimeters(inches) per minute
G95 Feedrate in millimeters(inches) per revolution
G96 Constant Surface Speed
G97 Spindle speed in rpm
-
the issue is the bounding box while moving
some one in other furom says that when he use screen recoder with autocad
-
i was thinking if you guys have got an answer ]
because there is also similer problem with
autocad and they are trying to contact there
resalers
-
yeah G-code but
______________________________
About all you can do is go will your Mastercam
longhand code or try the xxxxor canned cycles and see what happens.
________________________________
can you explaine more
any comments about manualy operation mentioned above
-
Eeyore-nonhuman
I don't hate you
I don't like that
but thank you
John Paris @ Kevlin
what I mean is my friend gave me the code above writen in xxxxor control - as he saied - i had a duobt so I made it on mastercam the Q. is if his code is right if you apply it to xxxxor control ? - I don't have a programe to verify it to make sure.
-
come on ...
where is your funny and friendly comments and help
-
%
O0000
G21
(PROGRAM NAME - T DATE=DD-MM-YY - 02-09-06 TIME=HH:MM - 14:53)
(TOOL - 1 OFFSET - 1)
(LFACE OD ROUGH RIGHT - 80 DEG. INSERT - CNMG 12 04 08)
G0T0101
G97S542M13
G0G54X173.129Z35.789
G50S3600
G96S295
G99G1X-1.6F.2
G0X173.129
Z33.801
G1X-1.6
G0X173.129
Z31.814
G1X-1.6
G0X173.129
Z29.826
G1X-1.6
G0X173.129
Z27.838
G1X-1.6
G0X173.129
Z25.851
G1X-1.6
G0X173.129
Z23.863
G1X-1.6
G0X173.129
Z21.876
G1X-1.6
G0X173.129
Z19.888
G1X-1.6
G0X173.129
Z17.901
G1X-1.6
G0X173.129
Z15.913
G1X-1.6
G0X173.129
Z13.925
G1X-1.6
G0X173.129
Z11.938
G1X-1.6
G0X173.129
Z9.95
G1X-1.6
G0X173.129
Z7.963
G1X-1.6
G0X173.129
Z5.975
G1X-1.6
G0X173.129
Z3.988
G1X-1.6
G0X173.129
Z2.
G1X-1.6
G0X173.129
Z0.
G1X-1.6
G0G42X115.131
Z52.79
G1X111.042Z52.611F.1
Z-92.784F.2
X114.931Z-92.614
G40X117.76Z-91.2
G0G42Z52.611
X111.042
G1X107.154Z52.441F.1
Z-92.954F.2
X111.042Z-92.784
G40X113.871Z-91.37
G0G42Z52.441
X107.154
G1X103.265Z52.271F.1
Z-93.124F.2
X107.154Z-92.954
G40X109.982Z-91.54
G0G42Z52.271
X103.265
G1X99.376Z52.101F.1
Z-93.294F.2
X103.265Z-93.124
G40X106.093Z-91.71
G0G42Z52.101
X99.376
G1X95.487Z51.931F.1
Z-93.464F.2
X99.376Z-93.294
G40X102.204Z-91.88
G0G42Z51.931
X95.487
G1X91.598Z51.76F.1
Z-93.634F.2
X95.487Z-93.464
G40X98.315Z-92.05
G0G42Z51.76
X91.598
G1X87.709Z51.59F.1
Z-93.805F.2
X91.598Z-93.634
G40X94.426Z-92.22
G0G42Z51.59
X87.709
G1X83.82Z51.42F.1
Z-93.975F.2
X87.709Z-93.805
G40X90.538Z-92.39
G0G42Z51.42
X83.82
G1X79.931Z51.25F.1
Z-94.145F.2
X83.82Z-93.975
G40X86.649Z-92.56
G0G42Z51.25
X79.931
G1X76.042Z51.08F.1
Z-94.315F.2
X79.931Z-94.145
G40X82.76Z-92.731
G0G42Z51.08
X76.042
G1X72.154Z50.91F.1
Z-94.485F.2
X76.042Z-94.315
G40X78.871Z-92.901
G0G42Z50.91
X72.154
G1X68.265Z50.74F.1
Z-94.655F.2
X72.154Z-94.485
G40X74.982Z-93.071
G0G42Z50.74
X68.265
G1X64.376Z50.57F.1
Z-94.825F.2
X68.265Z-94.655
G40X71.093Z-93.241
G0G42Z50.57
X64.376
G1X60.487Z50.4F.1
Z-94.995F.2
X64.376Z-94.825
G40X67.204Z-93.411
G0G42Z50.4
X60.487
G1X56.598Z50.229F.1
Z-95.165F.2
X60.487Z-94.995
G40X63.315Z-93.581
G0G42Z50.229
X56.598
G1X52.709Z50.059F.1
Z-95.336F.2
X56.598Z-95.165
G40X59.426Z-93.751
G0G42Z50.059
X52.709
G1X48.82Z49.889F.1
Z-95.506F.2
X52.709Z-95.336
G40X55.538Z-93.921
G0G42Z49.889
X48.82
G1X46.392Z49.783F.1
G2X44.931Z48.986R.8
G1Z-94.803F.2
G2X46.531Z-95.603R.8
X46.671Z-95.6R.8
G1X48.82Z-95.506
G40X51.649Z-94.091
G28U0.W0.M05
T0100
M30
%
%
O0000
G21
(PROGRAM NAME - SALEM DATE=DD-MM-YY - 20-08-06 TIME=HH:MM - 17:48)
(TOOL - 1 OFFSET - 1)
(LFACE OD ROUGH RIGHT - 80 DEG. INSERT - CNMG 12 04 08)
G28U0.W0.
G50X250.Z250.
G0T0101
G97S869M13
G0X108.021Z98.
G50S3600
G96S295
G99G1X-1.6F.2
G0Z100.
X46.259
Z100.7
G1Z-31.573
X49.088Z-30.159
G0Z100.7
X42.518
G1Z34.2
X43.4
G3X45.4Z33.2R1.
G1Z29.2
Z-.8
X48.228Z.614
G0Z100.7
X38.778
G1Z57.925
G3X39.4Z57.2R1.
G1Z34.2
X42.918
X45.747Z35.614
G0Z100.7
X35.037
G1Z58.644
X35.125Z58.571
X35.539Z58.381
X36.033Z58.259
X36.676Z58.2
X37.4
G3X39.178Z57.658R1.
G1X42.006Z59.073
G0Z100.7
X31.296
G1Z67.153
X34.675Z59.043
X34.801Z58.84
X35.125Z58.571
X35.437Z58.428
X38.265Z59.842
G0Z100.7
X27.555
G1Z96.037
X29.814Z94.907
G3X30.4Z94.2R1.
G1Z69.303
X31.696Z66.193
X34.524Z67.607
G0Z100.7
X23.814
G1Z97.907
X27.955Z95.837
X30.783Z97.251
G28U0.W0.M05
T0100
M01
(TOOL - 2 OFFSET - 2)
(LROUGH OD GROOVE CENTER - NARROW INSERT - N151.2-185-20-5G)
G28U0.W0.
G50X250.Z250.
G0T0202
G97S741M13
G0X49.4Z14.076
G50S3600
G96S115
G1X38.331F.1
G0X49.4
Z12.094
G1X37.34
G0X49.4
Z16.058
G1X39.323
X39.719Z15.86
G0X49.4
Z10.111
G1X36.349
G0X49.4
Z18.041
G1X40.314
X40.71Z17.842
G0X49.4
Z8.129
G1X35.358
G0X49.4
Z20.023
G1X41.305
X41.701Z19.825
G0X49.4
Z6.147
G1X34.367
G0X49.4
Z22.005
G1X42.296
X42.693Z21.807
G0X49.4
Z4.165
G1X33.376
G0X49.4
Z23.987
G1X43.287
X43.684Z23.789
G0X49.4
Z2.182
G1X32.385
G0X49.4
Z25.97
G1X44.278
X44.675Z25.772
G0X49.4
Z.2
G1X31.393
G0X49.4
Z27.952
G1X45.269
X45.666Z27.754
G0X49.4
Z-1.414
X48.228
G1X45.4Z0.
X30.881
G0X48.228
Z29.564
G1X45.4Z28.15
X44.956
X30.881Z0.
X31.381Z.25
G0X48.228
G28U0.W0.M05
T0200
M01
(TOOL - 4 OFFSET - 4)
(LFINISH OD FINISH RIGHT - 35 DEG. INSERT - VNMG 16 04 08)
G28U0.W0.
G50X250.Z250.
G0T0404
G97S3600M13
G0X23.531Z99.766
G50S3600
G96S295
G1Z97.766F.3
X29.531Z94.766
G3X30.Z94.2R.8
G1Z69.282
X34.287Z58.993
X34.433Z58.758
X34.812Z58.443
X35.311Z58.215
X35.906Z58.068
X36.635Z58.
X36.671
X37.4
G3X39.Z57.2R.8
G1Z34.
X43.4
G3X45.Z33.2R.8
G1Z29.2
Z0.
X47.828Z1.414
G28U0.W0.M05
T0400
M01
(TOOL - 3 OFFSET - 3)
(LTHREAD OD THREAD RIGHT INSERT - R166.0G-16UN01-100)
G28U0.W0.
G50X250.Z250.
G0T0303
G97S1345M13
G0X32.Z100.785
X29.156
G32Z76.206E1.75
G0X32.
Z100.649
X28.665
G32Z76.206E1.75
G0X32.
Z100.542
X28.28
G32Z76.206E1.75
G0X32.
Z100.451
X27.953
G32Z76.206E1.75
G0X32.
Z100.371
X27.663
G32Z76.206E1.75
G0X32.
Z100.298
X27.4
G32Z76.206E1.75
G0X32.
Z100.231
X27.157
G32Z76.206E1.75
G0X32.
Z100.231
X27.157
G32Z76.206E1.75
G0X32.
Z100.785
G28U0.W0.M05
T0300
M01
(TOOL - 2 OFFSET - 2)
(LCUTOFF OD GROOVE CENTER - NARROW INSERT - N151.2-185-20-5G)
G28U0.W0.
G50X250.Z250.
G0T0202
G97S3600M13
G0X4.039Z-1.99
G50S3600
G96S115
G1X-.2F.1
G0X4.039
X41.504
G28U0.W0.M05
T0200
M30
%
I alredy have this answer befor I ask this Q. and just to make sure thats the right in xxxxOR sys.
-
hi guys
i have got two operations from a friend and i've checked them on MCU utility but it does not give me the same result that i wanted to got but he saied that he did them on NC machine on xxxxOR system on turning center 8055T
the operation is shown below with the result
;;; code G(Code iso) برنامج بـ
;;;تسوية و دورة خرط
;;; T1D1
N10G54
N20G96S200M4
N30G92S1200
N40T1D1
N50G0X50Z5
N60G1X50Z-0.5
N70G1X-1.6F0.50
N80G0X50Z5
N100Z0
N110G1X-1.6
N120G0X50Z1
N130G68X20Z0C1D1L0.5M0K0.2F0.15H0.1S310E380; دورة خرط
N140G0X50Z50M5
;;; دورة لولبة
;;;Outil D2T2
N210G96S200M4
N220G92S400
N230T2D2
N240G0X30Z5
N250G86X26.933Z0Q26.933R-20K0I1.533B0.2E0.1D2L0.01C2.5J0A0W0; دورة لولبة
N260G0X50Z50M30
N310G1G39R3X30Z0
N320G1X30Z-25
N330G1G36R2X42Z-40
N350G1X42Z-64
N360X45
; 45x100 الخام
N10 G54
N20 G96S150M4
N30 G92S1200
N40 T1D1
;تسطيح في تمريرتين
N50 G90G0G41X50Z4
N60 G1Z1
N70 X-1.6F0.50
N80 G0X50Z4
N90 G1Z0
N100 X-1.6
N110 G0X50Z4
; خرط 8 تمريرات
N120 G1X43Z2
N130 Z-44
N140 X50
N150 G0Z4
N160 G1X39Z2
N170 Z-44
N180 X50
N190 G0X50Z4
N200 G1X37Z2
N210 Z-44
N220 X50
N230 G0Z4
N240G1X35Z2
N250 Z-44
N260 X50
N270 G0Z4
N280 G1X33Z2
N290 Z-44
N300 X50
N310 G0Z4
N320 G1X31Z2
N330 Z-44
N340 X50
N350 G0Z4
N360 G1X30Z2
N370 Z-44
N380 X50
N390 G0G40X100Z100M30
i want you comment for evry thing you could relise in the given things above
and where can i verfiy the code which writen in xxxxor i mean a program such as MCU
-
-
thank you
i was waiting for this since a long time
-
hi guys what is g306
i was trying to do similer op. the the code was having 50 block max.
-
Hi guys every on here is taking about the ram
What about the processor? I think more important than the ram because it reaches a limit where 4 gig as fast as 10n gig very small (invisible) difference
-
i was woundering how you do this
سالم حسين الوحيشي
thank you guys
-
I wanted to attend this discussion but the pic is the problem
Economic Feasibility
in Industrial Forum
Posted
looking for Economic Feasibility
for cnc workshop project