RunninWideOpen
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by RunninWideOpen
-
Cutter Comp on G2/G3 Error
RunninWideOpen replied to RunninWideOpen's topic in Machining, Tools, Cutting & Probing
Thank you Jparis. That worked. -
Cutter Comp on G2/G3 Error
RunninWideOpen replied to RunninWideOpen's topic in Machining, Tools, Cutting & Probing
As a workaround, I turned cutter comp off on Slot Milling and added some stock to leave, then I added a Contour to work as a finishing operation with cutter comp turned on. it put the on a linear move, however cutter comp on/off wiped out the end of my slots. The slots are suppose to be full-radius.
-
Hello, I'm still pretty new to mastercam. I'm trying to use cutter comp on a slot milling operation. There's no lead-in options in slot milling, and Mastercam keeps turning on cutter comp on a G3, which my Haas will not accept. How do I get mastercam to turn on cutter comp on a linear move?N 2010 G1 Y-1.124 N2020 G3 X.8881 Y-1.1049 I-.0191 J0. N2030 G41 D6 X.8691 Y-1.124 I0. J-.0191 N2040 X.8931 Y-1.148 I.024 J0. N2050 X.9172 Y-1.124 I0. J.024 Haas error code is; 340 Cutter Comp Begins With G02/G03
