cool thanks for the reply

Is there a way to have the g code post out like this? Instead of not having an indent to make the g code look a little nicer and easier to read. Like how fusion 360 does. % O00084 (PART) G20 (TOOL - 1 OFFSET - 1) (MDJNR164C INSERT - DNMG433MS) (FACE ROUGH) G00 T0101 G18 M8 G97 S1798 M3 G00 G54 Z.01 X1.7 G50 S2000 G96 S800 G99 G01 X-.0938 F.007 G00 Z.11 (ROUGH PROFILE) X1.3269 Z.2099 G01 Z.1099 Z-1.17 X1.4998 X1.6412 Z-1.0993 G00 Z.2099 X1.1538 G01 Z.1099 Z-1.17 X1.3269 X1.4683 Z-1.0993 G00 Z.2099 X.9806 G01 Z.1099 Z-1.17 X1.1538 X1.2952 Z-1.0993 G00 Z.2099 X.8075 G01 Z.1099 Z-1.17 X.9806 X1.122 Z-1.0993 M9 G00 G53 X0. G53 Z0. M01 (TOOL - 3 OFFSET - 3) (3D LATHE TOOL-1 INSERT - INSERT) (FACE FINISH) G00 T0303 G18 M8 G97 S2000 M3 G00 G54 Z0. X1.008 G50 S2000 G96 S790 G01 X-.0313 F.0065 G00 Z.1 (FINISH PROFILE) X.7583 Z.0154 G01 Z-.0046 X.7783 Z-.0146 G03 X.7875 Z-.0256 R.0156 G01 Z-.6956 Z-.73 X.8261 Z-.7248 M9 G00 G53 X0. G53 Z0. M01 (TOOL - 5 OFFSET - 5) (LATHE TOOL 3) (SPOT) G00 T0505 M8 G97 S2000 M3 G00 G54 Z.25 X0. G99 G81 Z-.1 R.1 F.005 G80 M9 G53 X0. G53 Z0. M01 (TOOL - 16 OFFSET - 16) (LATHE TOOL 4) (.201 THRU HOLE) G00 T1616 M8 G97 S2000 M3 G00 G54 Z.25 X0. G99 G83 Z-.9904 R.1 Q0.05 F.005 G80 G00 Z.25 M9 G53 X0. G53 Z0. M01 (TOOL - 8 OFFSET - 8) (1/4-20 RH TAP) (.250-20 TAPPED HOLE) G00 T0808 M8 G97 S500 M3 G00 G54 Z.25 X0. Z.1 G84 Z-.8 R.1 E.05 G80 G00 Z.25 M3 M9 M5 G53 X0. G53 Z0. M01 (TOOL - 4 OFFSET - 4) (0.3125 4 CENTER DRILL) (SPOT .125 HOLES) T0404 M154 M8 G97 P1500 M133 G98 G18 G00 G55 Z-.365 C0. X1.1875 G241 X.3875 R.9875 F4. C180. G00 G80 (SPOT .250 HOLES) X1.1875 Z-.1625 C90. G241 X.4875 R.9875 F4. C-90. G00 G80 M9 M155 M135 G53 Y0. G53 X0. G53 Z0. M01 (TOOL - 6 OFFSET - 6) (0.25 1/4 JOBBER DRILL) (.250 THRU HOLES) T0606 M154 M8 G97 P1000 M133 G98 G18 G00 G55 Z-.365 C0. X1.1875 G243 X-.9125 R.9875 Q0.05 F5. G00 G80 M9 M155 M135 G53 Y0. G53 X0. G53 Z0. M01 M00 (CHANGE .204 DRILL TO .125 DRILL) (TOOL - 6 OFFSET - 6) (0.125 1/8 HEAVY DUTY JOBBER DRILL) (.125 THRU HOLES) T0606 M154 M8 G97 P1500 M133 G98 G18 G00 G55 Z-.1625 C-90. X1.1875 G243 X-.9125 R.9875 Q0.05 F2. G00 G80 M9 M155 M135 G53 Y0. G53 X0. G53 Z0. M01 (TOOL - 7 OFFSET - 7) (NGDHR-16 - GC-4125 INSERT - GC-4125) (FINISH FRONT RADIUS) G00 T0707 G18 M155 M8 G97 S800 M3 G00 G54 Z-.751 X.9875 G50 S800 G96 S500 G99 G01 X.7875 F.003 G03 X.772 Z-.78 R.058 G00 X.8715 Z-.809 G01 X.6715 G02 X.772 Z-.78 R.058 G00 X.9875 (PART) X1.408 Z-.809 G01 X1.208 F.001 X.185 X.385 G00 X.2 M9 M5 G53 X0. G53 Z0. M30 %