Rob_QM
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Rob_QM
-
-
I am currently running 2023 with multiple seats and have a network license. The Hasp is setup on its own system as a "license server". I would like to utilize the CIMCO editor that comes with mastercam on other systems so I can edit and use the DNC feature on the shop floor.
Is their a way to install the just editor and required Hasp software?
-
On 6/9/2022 at 9:43 AM, JParis said:
I'm curious as to why the tool numbers in the librarymatter, unless you're doing a couple of pretty specific things...
You can set it up so that tools load sequentially....this negates needing to number them in a library..
Now, if you're setting up standardized carousel tooling, that's a different thing and would require saved tools numbers...in this case, I will make an empty Mastercam file with those tools in it...I use that as a "seed" file and import any parts into it, then do a "Save As"
I have a library that I draw on that has 1,000+ tools...as we use Mazak Tool life, they are saved with T#'s such as 11010500 for a .500 F-endmill...in those case I do not use the add sequential option
honestly I don't think they really do. for me it is a combination of my own OCD and also grouping tools together and being able to locate then quickly, for example knowing my facemills start at tool 100 and my inch endmills start at tool 150 while my metric endmill start at tool 170 etc. I am still very new to mastercam and am slowly learning how to customize it to my own workflow.
-
1 hour ago, crazy^millman said:
Sorry there is not an easy way. You would need to import them into one file and use them in all operations to use that process that allows it. Inside of the Stand alone or internal Tool Manager neither have this ability. Might could use a SQL Express process, but I would have to spend a few days figuring that method out.
Thank you for the info.
-
I have been slowly building a custom tool library. I started with the mill_inch library as a base then deleted a number of tools and started adding tools as needed. Is their a way to auto renumber the tools in the library to fill in the gaps I created by deleting tools?
Also should mention I am using 2023
Install question
in Industrial Forum
Posted
That is what I am finding so I just did a full install and just use the editor.
Thanks