Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
1) Trying to do probing on DOOSAN NHP 5000 -HMC with B axis machine. Control Fanuc 31i - Model B
2) History - we did only manual probe of the raw material to set the offsets and measuring some feature size etc only...no other serious probing. Machine is installed with Inspection plus & probe is RMP 60.
3) we started testing CAM (mastercam) based probing just a week ago..with CIMCO .
4)All the 3axis measuring we did on the B0 side without any issue and it worked good. We Checked ...hole dia & depth , rectangle pocket size , single surface side angle check , Hole dia check and re-cut by auto adjusting tool wear etc on B0 face..
5) PATH OBSTRUCTION error pop-up when rotated the B axis table to 90 ( B+90/-90/45/30 etc ) to check the features on the B90 face . Probe switch on at 9832 then goes to the line 9810 and throws the alarm but still the probe is around 60mm above the part surface.
6) Job mounted on Tombstone face - B0
Please look at the code below and if anyone can point out my mistake...
TY
%
O0056
( DIA MEASURE on B90 FACE )
N2M24
N4M132
N6( TOOL LIST )
N8( T40 - RMP )
N10G21
N12G00G17G40G80G90
N14G91G00G28Z0.
N16M01
N18G69
N20( B90 SIDE - DIA. MEASURE )
N26( T40 - RMP )
N28T40M6
N30G54
N32S0M05
N34M184
N36( REF PLANE + B90 )
N38G90G00B90.
N40G68.2P1X0.Y0.Z0.I0.J90.K0.
N42G53.1
N44G00X20.Y17.542
N46G43H40Z150.
N48 M165P9832
N50G65P9810X20.Y17.5423Z70.F600. ( PATH OBSTRUCTED ERROR AT THIS LINE )
(also tested removing N50 , probe advanced to Z32.5 ( refer N52) ) and retract back without any probing move )
N52 M165P9823A0.B120.C-120.D20.Z32.5R-8.Q5.
N54 M165P9810Z70.
N56 M165P9833
N66M5
N68G69
N70G91G00G28Z0.
N74G00G28X0.Y0.
N76G00G91G28B0.
N78M25
N80M133
N82M30
%
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.
Probing - RMP60
in Machining, Tools, Cutting & Probing
Posted
Probing - RMP60
1) Trying to do probing on DOOSAN NHP 5000 -HMC with B axis machine. Control Fanuc 31i - Model B
2) History - we did only manual probe of the raw material to set the offsets and measuring some feature size etc only...no other serious probing. Machine is installed with Inspection plus & probe is RMP 60.
3) we started testing CAM (mastercam) based probing just a week ago..with CIMCO .
4)All the 3axis measuring we did on the B0 side without any issue and it worked good. We Checked ...hole dia & depth , rectangle pocket size , single surface side angle check , Hole dia check and re-cut by auto adjusting tool wear etc on B0 face..
5) PATH OBSTRUCTION error pop-up when rotated the B axis table to 90 ( B+90/-90/45/30 etc ) to check the features on the B90 face . Probe switch on at 9832 then goes to the line 9810 and throws the alarm but still the probe is around 60mm above the part surface.
6) Job mounted on Tombstone face - B0
Please look at the code below and if anyone can point out my mistake...
TY