I have a question that may have been covered before but I can only find the hotkeys for the main UI. In the data fields Mastercam has hot keys for extracting data from the graphics screen IE D for diameter. for example of where to use this. if your creating a tool drill for example when inputting the diameter if you put d in the field for the diameter you can select the hole your drilling and Mastercam will extract the diameter off the arc selected. Z for depth in construction plane. Does anyone know if there is a list for all of these short cuts? The one I am trying to use at the moment is distance between 2 points. say you want to make 2 passes and want to select the distance between an end point and a mid point of a line. This would be handy for the way I machine. Thanks #LFG

I understand its not a MC issue trying to problem solve and network with people that have experience with these issues. the machine this job runs on is down and trying to keep people busy down stream. This Mazak hasnt run programs over 1 MB due to the floppy emulator and I haven't needed to. Calmotion hasent returned my phone call

nothing?

I need help with the configuration of this calmotion to the MAZAK 640m windows 2000 version of this machine tool. I have been running this mill small programs under 1mb from the usb floppy emulator. The file I am trying to run is 2.7mb so I am stuck