Thank you all for the help that no one responded in the entire Mastercam community, I thought there were colleagues in mind, like a small request, to correct me in creating my machine configuration, I had to figure it out on my own and still created my machine working in Mastercam, all the best, I hope you will do much more for others... https://youtu.be/ii1Hyf7XUDA

You say everything correctly, but I don't have a machine and I don't have the task to go through all the stages, I would like to start by understanding the creation of a machine with similar kinematics in Mastercam, so that at least everything works correctly in Mastercam, if I haven't figured out at this stage where I'm going to the postprocessor to the machine, but I want to figure it out while it doesn't work out on my own, so I'm turning to the community / colleagues, I hope they will respond here or on other forums...

Maybe there is no point without a postprocessor, but now my goal is to understand exactly how to create a machine and what is the correct structure with such kinematics with so many axes and how it should be implemented in Mastercam, otherwise with 5 axes everything is more or less clear, and then questions arise, I hope they will help to understand here... Thanks for the link to Zip2Go!

I'm not familiar with ziptogo conversion, apparently I need to get acquainted, if there is a link, please share it, I'll see how it's done? As for the postprocessor for this model, there is no one, so far I'm just trying to create a machine model myself for a simulation machine in Mastercam.

As far as I know, the MachSim file of the machine opens in any version of Mastercam, I just archived the machine files, it's enough to unpack it.

Запись_2023_07_11_20_11_59_220.mp4 Окума_MCR_A5C.zip Here is a short video of the machine and moving the axes manually, I will attach the file of the machine, maybe someone will have the desire and time to look at the machine and fix the MachSim file, what I am trying to do in the 2020 version, but I have not yet figured out why and what I am doing wrong, if not if it were (6 W axes), then I think there would be no problems, help someone, I really wanted to understand such kinematics and how is it implemented in Mastercam?

Good day!! I created a model of the machine myself, which I was looking for, but now I have questions, please tell me, can someone share the scheme / configuration of the machine like the Okuma MCR-A5CII machine or from this model line or with similar kinematics of the machine, where in addition to the linear Z axis, there is a linear W axis in the form of traverses, I'm trying to create my own machine configuration of this machine model in Mastercam, but apparently something is not working correctly, so I would like to see a structure with such kinematics on a similar machine? In my case, I'm trying to create a configuration where the XYZ and W + 2 axes are rotating CB axes, the problem is in the W axis, this axis works correctly when moving manually, but it is ignored during simulation, only the Z axis moves, that's where I have a problem until I figured it out, can someone tell me who has ever create a configuration of such a machine?