-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Sparks
-
-
Thanks Mr. J, I went in this am and manually (dragged and dropped) to correct. Will now go into the tool manager and do as you suggest.
Much thanks.
-
I'm having problems renumbering my tools. Using "edit selected operation / renumber tools", I try to renumber all the tools in the toolpath group and some of the tools are renumbering per operation instead of per tool change.
Any help would be greatly appreciated.
-
Gcode, got them impressions yet?
-
I seldom watch, although I like stopping by the machines and asking the operators "why did it do that?". Love the expression on their face.
-
Please, please, please!!!
-
Gotta go play now.
-
Thanks Steve.
-
22 minutes away...........
-
Woohooo..... Playday.
-
My main is a 23" widescreen with a 19" second.
Plenty o' room for X on the 23.
HP2335 / SyncMaster 910T
-
Thanks Tommy. I knew I couldn't get the company to pick up the tab, so I didn't bother to look into costs.
-
This one might be what you need.
"The Radius 320™ incorporates three 20.1" LCD panels into a continuous display system with a total resolution of 5.76 million pixels. With the individual panels wrapping around the user, the Radius 320™ provides an ergonomically-friendly viewing experience across a 50-inch diagonal."
-
Get a Space Pilot and you may go absolutely giddy.
No joke.
-
You can also right click on a V9 file and then select "open with" and pick MCX to open the file.
Just remember to check the "Always use the selected program....." box, that way it will always default to opening with X.
-
Check your display properties settings, you may have to give them a tweak. Use your partners settings as a reference.
-
You could add a fence surface parallel to your machining surface as an extention.
-
Had that problem with MR1 also. Got by it by renaming the program. At home now or else I'd walk through it.
-
Downloaded and reading, going to be a good day today. So much to play with.
-
Or create your own and default to it?
Whats your Dual monitor look like
in Industrial Forum
Posted
I run Op manager and Level manager on the left screen, Mcam in the center and Acad or Verify on the right.
Monitors, give me more so's I can stack them. I don't want to stop at three.