We just purchased two Haas VF2 milling machines. I was able to get into the mpfan post and changed the mist to an air blast. I would also like to put in a home position to retract the Z all the way up and the Y all of the way out. When our programs have finished, the Z is at the retract amount and I manually retract the Z all the way up. I have to do the same to the Y also. Retract all the way out to take a look at the finished operation. I have no idea where to begin. I have changed code before in other post but can't seem to figure out what to do with this one. Any help would be greatly appreciated. Thanks Tom