MichaelJ
-
Posts
115 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by MichaelJ
-
-
Hi
do a search for NT or millturn on this, there is some talk on it.
-
"No because the majority of my needs are for 2 1/2 axis mill"
you got to be ****'en Neil that is all you do?
-
I hope you have a speedy and full recovery!
-
do you have a solid?
you can pick the top hole for the first drill cyl
then pick the bottom hole for the 2nd drill cyl.
jm2c
-
Look up thinbit I dont have the web site at home.here is the add. http://www.kaisertool.com/
-
N1360 G00 Z.1
N1362 M05
N1364 G91 G28 Z0.
N1366 G28 Y0.
N1367 G91 X-4.
N1368 G90
N1370 M30
Like this
-
Thanks for the info guys. I contacted a local who makes aftermarket heads and he told me that he uses a straight bore with NO taper when he cuts them. So I really see nothing wrong with the way I did it. But was confused when my tap cut out material in the head that was already threaded.
-
I realize it didnt make it an "ideal" fit, but very little change. You can acutally start the engine with it being only finger tight, I really doubt it will pop out. Thats why I am trying to figure out the thread differences.
Thanks for the help.
-
I threaded the round stock with a carbon steel die. Positive I didnt use the 1.5mm pitch because I matched it up with the pitch gauge. Used the matching tap and took a little material out of the head, which made the spark plug slightly loose(nothing major)and it threaded on just fine.
-
It does fit a motorcycle. Sparkplug threads in just fine into two different heads. But wont thread onto a threaded piece of round stock.
-
It seems like the spark plug threads have a taper to them like a NPT. It will thread on two threads on a straight cut M14x1.25 and locks up.
The M14x1.25 is a finer pitch cause 2.0 is course and 1.5 is fine.
-
I am looking to find out the difference between spark plug threads and regular threads, Mostly the M14x1.25
-
What is the make of the saw and the holder that you are using?
-
I got 3 april and 3 for sept.
-
what machine do you have?
i need to read the books some more whin i get time
i ges.
-
are you talking what the meter on the screen.
or somthing else?
-
OK thanks i will
thank Chris
-
have you tryed Greenfild or Sossner i use them both?
-
were are the arc center shifted at?
-
From 1979 to 1991 manuals 1991 to now manuals and CNC.
-
"I have red/green color blindness."
what has that jot to do with mastercam?
-
have a good Birthday Jay and have a good time play
acting 21 tonight
-
was mike the one that used to come en here or was it someone else
-
what kind of a parting tool do you have?
CNC collet chuck suggestions
in Industrial Forum
Posted
"S26 system is great for main spindle where concentricity isn't critical."
Are you talking .0001th or .01 out of concentricity?
Thanks
Michael