Rick project onto surface

make sure you have it set to parametric

create points node points

run whole splie c hook

edit simplify

you should be good then

your car might come with AC but you dont have to use it.

Really I am sure they added it for many people that asked for it.

I don't personaly use it but I am not going to get all lit-up over it either

Thanks Bruce.

Jford yes it is aluminum, I used steel tubing with taper fittings. we pull 30 on the vac I cant remember the measurement symbol

I appreciate all the help to guys!

where I use to work we used a real nice seal, it still fit in the standard groove but the seal itself had a little flap on top. so if you were looking at a cross section it looked like a box with the lid open to about 45 degrees.

excellent seal even with variations in the surface

jford we have central vac here, I am designing a universal base plate, and interchangeable tops with 6 zones for smaller top plates.

thanks guys

anyone know where to find vac fixture seal I can't find it.

thanks griifths I will try to contact him

dgriffiths, would you have a contact name in reno that I could contact?

Rizzo do you use your robot for machining?

Anyone in washington or oregon using robots for machining, trimming, assembly, etc

gaijin +100

Mill turn they have it dialed

milling continous 4 or 5 not a chance.

Oh you were talking about CMM verification I missed that.

I would think you could get vericut to do this

Great please tell Sam Hi and I will stop bye and see you guys soon!

I think people confuse C/L rotation and offsets. you can program from centerline and still use offsets to make your minor adjustments.

Programming from centerline is a great way to go but you need to be organized and have everything modeled so you know where parts are sitting the setup time is almost non existant and usually have a good part first try.

If your machine and or tombstone are not indexing correctly maybe it is time for some maintanance. why would you drive a porsche running without a cylinder or two.

Hey Lev how are you these days

Oh I see a new infomercial here "MAZAKS done in ONE" slogan

Oh Mr Mm there should be a software box in your electrical cabinet open it up and there is some paperwork in there that should have all the options you have.

Without G131 you will be in trouble, this all started about the time of the osp7000 control corner control went to crap without G131. even then on some of the 1st release 7000 controls it required a total board replacement to fix the overshoot. Now it is all good but you need G131 if you want good clean corners.

Did you have it on when you ran this feature?

Do you have lookahead?

Thanks Iowa Jim.

Dragracer please do not base your decision off of that, that is exactly why I am checking right now.

Mark is one if the best people and repair guys I know but he is gullable and I like to back him up when I can.

No just localy,

Jim yeah he is I just have never heard or worked with him in my years doing applications I just dont know if he is blowing smoke up marks butt or if he realy is talented. please keep that kind of quite. Im just trying to get a feel for him

Any one heard of a fanuc guy named Anthony Taff

A local shop here is having some upgrades and I guess he can come up here to do it they just wanted to check and make sure it's worth bringing him up to do it.