deadeye460
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by deadeye460
-
Found it, thank you for your help htm01
-
Thank you for the prompt reply. I checked and there isn't an opt stop button on the machine. Machine is a Northwood Saw/jet. Thanks again.
-
I am trying to put an optional stop into a post processor between tool changes. I can type the M01 into the spot where I want it, after the (SAW OFF) command, but the machine ignores it. Any help would be greatly appreciated. Thanks. Deadeye. $ENDIF $IF PIERCE = 1 $LET PIERCE = 0 $GOTO 99 $ENDIF $LET FRATC = 1 $IF [T] = 1 ''JET $LET HNUM = HNUMJET M24 (SAW OFF)(JOHNS JAN. 17 2018) M1 G43H0Z0 G91 G17 X0 Y0 G90 [WCSJET]the spot I believe it's needed but the machine ignores it. Thank you. Deadeye.
