Hi Guys

Anyone printing out adhesive labels when you have nested your parts

Have a customer machining a lot of cabinet parts and wants to label them before removing from the router table

The standard labels from Mastercam are too large and i wanted to know if anyone had any joy with custom labels

thanks

David

yes it did replace the demo, now allows you to save work

and one other thing, how do i get the image to show instead of a link

panic over, figured out how to put the picture in, phew

still need a solution for the printing

[ 10-27-2009, 11:25 AM: Message edited by: ajmer ]

have a customer using X4 MU1 and Vista, when printing dimension text the characters are not complete

whats printed is the same as shown in the dimension text preview window in system config

i cant replicate it, any ideas?

thanks

[ 10-26-2009, 08:17 PM: Message edited by: David Lowey ]

did someone mention Service Pack?

have had exactly the same problem here, processing complete message is shown but there are no results (two different installations of X4 MU1)

try opening up the filter tolerance in the Silhouette Boundary box, then try again but check that any vertical walls or parallel diameters are not now big arcs!

Phil,

The release date is the same North and South of the border, you can download X4 from the Mastercam website as soon as its available

The only delay is getting the actual box to you due to crossing international borders

It may take a few days extra this time round if each of the boxes needs a passport!!

Hi Rick

In your System Configuration > Files > AutoSave / Backup

check 'MCX Backup Files' and uncheck 'Use backup directory as defined in Files'

then the backup files will be placed in the same directory you opened the .mcx file from

Had the same question from a customer last year, he had unchecked all the Tool Materials in the Tool List Filter so no tools were shown