![](https://www.emastercam.com/uploads/set_resources_9/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
idahobum
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by idahobum
-
-
Actually, check the cutter offset value on the backplot options screen. X5 automatically adds half the cutter diameter and it shows the tool off the surface you are trying to cut. Its just a visual issue, the actual nc code is correct, by setting the value back to 0 it should display correctly.
New 3+2 at shop need B axis rotation to limit -65 and 110+
in Industrial Forum
Posted
Are you comfortable editing your post? If so look over the post code below, there should be a section like this in you post.