malibu
-
Posts
357 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by malibu
-
-
thank you GMCCS !!!!!!
question: how can I get x+5 to remember setting when closed?
(windows 7)
-
oops sorry
getting this error when installing md-cd-pst utility
-
hi all
I get this error (APPDATA|LOCAL|TEMP|CT9901.Tmp) windows 7 system
please advice
-
thanks kazmir44
found the area i was looking for.
sorry for late reply
-
hi all
how can i get lathe machine to rapid zero retract
on a id hole roughing?
still learning
thank you all
-
hi jparis
is it better to use cimco vs legacy option?
-
hi guys
is MU3 working fine?
is x+ working fine on MU3?
please advice
-
do you all use coolant?
-
the material is copper tungsten 70/30
-
hi all
should I use coolant on this material?
what feed and speeds should I use?
thanks
-
for some reason my boring bar shows always across parts( the wrong way) using verify only as second ref........ backplot is my tool for now (lathe).
maybe cnc software will get this fix on mu2.
-
have too many problems with verify mill and lathe.
runing out of excuses with boss.
cnc do you have an oppening? just kidding but please, please fix it.
-
is there a v9 download avaliable?
need to install v9 to test v9 lathe maybe verify on v9 is better than vx.
-
ok, thanks
-
hi Gunther,
thank you for this fantastic add on
it is a life saver.
how can I get it to display stock to leave on walls and floors(Tlist) ?
-
entity was set thanks gcode.
fixed for now!
renamed mc config
let mastercam to create new and it works
-
did a roll back driver and no luck, something still no good.
have one color on my solids for now.
-
thanks, verify works on my ati firegl 3100 pice of......
still have a problem on solids change color.
it is only working on my wireframe.
-
had to unistall, all this time waiting and now
I can't use x4mr1 .shame on you cnc
-
MAPPS IV is very nice, we got MAPPS III on ours and no ESPRIT.
-
hi mando,
what post are you using for your nl1500?
-
this machine did not come with ESPRIT so Mastercam has to be the one.
-
Company bought this new machine, any help will be highly appreciated
It has the msx-850 111 control.
Cnc Lathe world is all new for me. Training is coming soon but I am open
For all tips and suggestions from good people like you .
Thank you in advance
-
you are rigth dolphin it is not working right.
X+ Setup Sheet and Tool List - 3rd party Add-on
in Industrial Forum
Posted
thank you Gunther ! I can not picture Mastercam with out this great tool.