Norcen
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Norcen
-
-
YUP.
I'm sooo dumb.
Thanks guys.
-
I've used M.C. many years, but am new to MC X.
(X2 MR2(11.2,3.28)
I'm trying to put a line thru a pt tangent to an arc.
1)Select an arc
I click on the arc
2)select a tangent pt on the arc
I have no idea where the tangent pt is.
I've tried clicking on the pt I want the
line to go thru & it makes a tangent line,
but nowhere near the pt I want it thru.
I've tried clicking the arc again, it makes a
tangent line at a random angle.
3)select the 2nd end pt
this seems to have no function, except to
the establish the line length.
I'm sure I've done it before in MC X, & seem to
remember stumbling around til it majically worked.
What amI doing wrong.
Thanks
-
We recently bought a Router, so we upgraded to MCX and added Router/advanced nesting to our Lathe, Mill & Edm. The Router/nesting has it’s own hasp.
With MC9 I had a desktop icon for Lathe, Mill, & Wire. With MCX it’s all in one, which is neat except, I gotta juggle my Hasps when switching between Router & anything else.
MCX is pretty slow loading & it’s a real pain waiting to load, then telling me it’s gonna shutdown.
Is there anyway to make a shortcut to open MCX with the hasp I want to use.
Wire Edm machines
in Industrial Forum
Posted
Keep an eye on resistivity on display page.
Cut speed will really slow down below 4.5.
Means time to change resin.