TMozzone
-
Posts
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by TMozzone
-
-
The .eia programs here are just standard G-code programs ran as stand alones, also we have some machine the Mazatrol is the driver and EIA are treated as subs.
-
Thad,
Look at the Manchester Line of face grooving/treepan tools.
-
ted,
back to work.
-
Greg,
No problems here with X3 and Solid to 2d Profile.
Tried several differnt parts. No issues.
Todd
-
Paul is great great guy, been 6 years since I've had contact with him. Always did me and the company I worked for right!
-
Myself, I use rotate plane or geometry 100% of the time.
JP with an "or" statement how can it be 100%?
-
MoldPlus V1.9.10 should have come with 2 sample files that were put in MCAMXDATA upon install of MoldPlus. File names are FTA_Sample1.CATPART & FTA_Sample2.CATPART
-
Colin,
Are you hold court or are you and Neu going fishing?
-
Open parameters for the pocket routine,Click the Entry helix or ramp radio button.Add 90 to the XY angle field.
-
All the above advice is great. I personal enjoy Streaming Teacher, you get to pick and choose what topics YOU want to cover,
-
I've had the same issue only with imported geometery. Mostly Catia 5 stuff......
-
Looking for a right angled head for a new 50 taper machine on order. It's a Viper Pro-2150 Bridge Vertical Machining Center. What we need to do is drill and tap holes on the end of some tubes (8 ft long) we make. Any suggestions would be helpful
-
So far so good,
-
My very careful checking web site skills are not up to par. I couldn't find it?
-
Also you could turn off the arc center setting in the cad settings config file, create a new layer and define all your arc centers with points on that new layer.
-
When Collin speaks......Programmers listen
-
Pro/E is a great design tool.....My opinion of the manufacturing/machining side of there software is much differnt. Real time toolpath creation is far less with MC than Pro/E. It is what it is.......Good Luck.
-
JP,
X2 MR2 on the screen shot jumps out @ me.
-
Thanks Colin and gcode
-
Is there a way to print out the content of the level manager?
-
This happened to me yesterday. X2 MR1 SP1. The tool's in the operation I imported did'nt change to 0, but they did'nt maintain there orginal values.
-
Update Done
Thanks
-
Multi-DNC
-
I do appreciate the offer of help. I thought my question orinigaly was clear. I usally dont purchase add-on's or software in general
without documentation.
Blade Expert
in Industrial Forum
Posted
People are strange, when your a stranger.