Dave Perron
-
Posts
5 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Dave Perron
-
-
Well as an ex boss of mine told me. Never use carbide or PVD inserts to machine aluminum. Use hand ground cold rolled steel endmills ! Anything else would be ridiculous !!
-
Tip Comp for drilling makes it crash often for me. I am actually scared to check it. I always make sure I save my files before clicking it. It happens more often after I copy an operation and reuse it.
-
Hello everyone, we have a mori seiki SL-35 lathe with a fanuc 15 control. The operator wants to use a bar puller to pull a square pc of stk. He is having trouble getting the spindle to orientate correctly to the bar puller - because the part is square. Is there a way to adjust the rotation position of the spindle when M19 ( spindle orientation) is used? Thank you for your help.
-
Free Post !!! Where ??? Can I have one for a Mori Seiki SL-35B?
Reamer Feed & Speed in AISI 304
in Industrial Forum
Posted
From the machining data handbook.
this is is for cold drawm 304 ss 22-275 bhn ( to be safe, in the case of no certs)
Roughing reamer HSS 60 sfpm @ .005 ipr ( only if needed)
finish reamer carbide 50 sfpm @ .004 ipr
use water soluable and pre-drill to .242 ( c drill)