![](https://www.emastercam.com/uploads/set_resources_9/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
yamahaluv
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by yamahaluv
-
-
zoom in on one side, the start the window selection, and roll the zoom out and back in at the other side from the front or side view, and you can select only certain planes. then change the color so it is easy next time.
-
I have a new computer that is x64. i have had nothing but problems. i have been working with CNC software and have worked through those problems. The main issue now is randomly i cannot add or subtract in the different fields. it gives me an error then i have to reboot mastercam. I am using X2 MR2 and have both patches installed and have double checked that the files are the correct version. Thanks
-
Ramp also works! :-) just ramp the depth of the flute that is left.
look ahead parmeter on a fanuc 31i control
in Industrial Forum
Posted
its the G05.1 Q0 TURNS IT OFF AND GO5.1 Q1 turns it on. If you are running with macro equasions, it will skip all around.