veritasproject
Verified Members-
Posts
77 -
Joined
-
Last visited
Never
Recent Profile Visitors
600 profile views
veritasproject's Achievements
Newbie (1/14)
0
Reputation
-
It is set to index the shortest distance
-
Hi, when i post out a 4th axis move and there is a change in the direction it needs to cut like i zig zag move over a radius all the a moves are + when it should be changing form + to - and back again Help!!! the tool path is a 5x swart ( lock into 4 axis ) using X4 and MPmaster Post
-
i would like to say thank you to all of you out there for you help
-
i was just handed my walking papers do to the fact that the division i was working for out in China is going under. so here it is i am 5 axis programmer i am proficient in x2 and x3 okuma, fadal, and fanuc mill set up 4 years exparince if you know of any company's in so cal looking for some one please let me know. thank you all for your help
-
yes its a quadro fx 3700
-
i have a nvidai 3700 video card and i dont run solidworks is the solidworks driver still the best driver for master cam?
-
Robert just need to do it right and it will be ok
-
this is what it looks like and what i need is g code WNo.200902 ( PK009-OP2(2) ) UNo.MAT OD-MAX ID-MIN LENGTH RPM FIN-X FIN-Z WORK FACE 0ぃ葵 18. 0. 80. 1500 0.08 0.04 3. UNo.UNIT # 1 # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 #10 #11 #12 1 M 8 UNo.UNIT RV FV R-FEED R-DEP. R-TOOL F-TOOL 2EDG FCE 79 99 0.06 0.3 11 SEQ SPT-X SPT-Z FPT-X FPT-Z RGH 1 12. 0.3 0. 0. UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL 3DRL FCE 1 2.5 2.5 1.5 1. 11 0.03 1 SEQ SPT-Z FPT-Z 1 0. 2. UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL 4BAR OUT 0 12. 0. 88 90 0.08 0.3 11 SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH 1ar1 7.925 0. 9.356 0.413 0.826 0.05 2CTR @ 7.925 0.826 @ @ @ R U 3TPR 9.356 0.413 9o833 0.826 R 0.127 30. 0.05 4TPR 10.82 0.826 11.405 1.119 45. 0.03 UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL 5BAR OUT 0 12. 0. 88 90 0.12 0.3 2 SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH 1ar1 7.925 0. 9.356 0.413 0.826 0.05 2CTR @ 7.925 0.826 @ @ @ R U 3TPR 9.356 0.413 9o833 0.826 R 0.127 30. 0.05 4TPR 10.82 0.826 11.306 1.069 45. 0.03 5TPR 11.306 1.069 11.573 1.3 30. 0.03 UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL 6DRL FCE 1 4.3 2. 1.5 1. 11 0.05 12 SEQ SPT-Z FPT-Z 1 0. 42. UNo.UNIT CHANGE-PT GEAR TOOL 7MNP 1 1 12 SEQ G DATA-1 DATA-2 DATA-3 RADIUS/VARIABLE RPM FEED M OFS 1 0 UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL 8BAR IN 0 4.3 0. 80 85 0.06 0.2 6 6 SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH 1ar1 7.925 0. 6.757 0.242 0.826 0.05 2CTR @ 7.925 0.826 @ @ @ R D 3TPR 6.757 0.242 4.3 1.47 45. 0.05 UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL + 9DRL FCE 4 4.5 3. 3. 3. 11 0.04 10 SEQ SPT-Z FPT-Z 1 0. 79. UNo.UNIT CHANGE-PT GEAR TOOL 10MNP 1 1 10 SEQ G DATA-1 DATA-2 DATA-3 RADIUS/VARIABLE RPM FEED M OFS 1 0 UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL +11DRL FCE 3 4.5 @ @ @ 12 0.03 8 SEQ SPT-Z FPT-Z 1 0. 79. UNo.UNIT CHANGE-PT GEAR TOOL 12MNP 1 1 8 SEQ G DATA-1 DATA-2 DATA-3 RADIUS/VARIABLE RPM FEED M OFS 1 0 UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL 13BAR OUT 0 11.5 0. 88 36 0.03 0.2 7 SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH 1LIN @ @ 7. 0. @ 0.03 2ar1 7.925 0. 9.356 0.413 0.826 0.03 3CTR @ 7.925 0.826 @ @ @ 4TPR 9.356 0.413 9o833 0.826 30. 0.03 5LIN @ @ 11.5 0.826 @ 0.03 UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL +14BAR OUT 0 11.5 0. 88 36 0.03 0.2 7 A SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH 1LIN @ @ 7. 0. @ 0.03 2ar1 7.925 0. 9.093 0.242 0.826 0.03 3CTR @ 7.925 0.826 @ @ @ 4TPR 9.093 0.242 11.349 1.37 45. 0.03 5TPR 11.349 1.37 11.5 1.5 0.03 UNo.UNIT COUNTER RETURN WK.No. CONT. NUM. SHIFT 15END 0 1 200901 0
-
dose any one out there know where i can find out how to change mazatrol code to gcode i have a nc file in mazatrol that was sent to me from our china plant and i can make heads or tails of it . any help would be great
-
Changing origin after toolpaths are created
veritasproject replied to JPensack Acker Drill's topic in Industrial Forum
make a new wcs for the new zero and go to edit selected operations/edit common parameters then go to the planes and change it to the new wcs then update your z depths in all your toolpaths -
where are you located? ntma in ca has some advanced class for mastercam
-
dose any one know of a roller burnish manufacturers in the usa i just cant find one on the web
-
i am sorry at my new company i do not have a 5x set but just play with it and you will get. and did you draw your custom tool?
-
i would try a swarf toolpath and set the normals the right way
-
i tried to open you fpt file and it is not the right format or some thing is it an x3 file?
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.