jameszhawks
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by jameszhawks
-
-
Yea it would be a lot easier with a form tool, but we do to many different sizes. with this tool we just change inserts.
We just do prototype so finish is not super critical . type spur involute
Thanks for the reply
-
Can someone help me with this gear? I'm trying to get it to cut from the side like in the video. The fly cutter is 66 mm dia. 1mm thick like a jewelers saw.
What is the best tool path to use
https://www.youtube.com/watch?v=_LYaMqaUpqw
Thanks in advance
- 1
-
Can anyone tell me if any of the Generic posts in Mastercam X2 mr2 will work on a Mazak mill 640t controller
4th axis Gear
in Industrial Forum
Posted
Can't seem to get this to machine on the side like in the video, Mastercam sees the tool to big. no problem with 1mm endmill. using 5 axis curve on 4 axis machine
anyone care to try
tool is 66mm dia 1mm thick like a t-slot or jewelers saw