Has anyone figured out how to undock the ribbon bar from the toolbars. I enabled it in the config settings but it wont move.

I'm in total agreement with CamMan1, all this added effort to accomplish what was such an easy task in X6 is a waste of time. I have yet to find anything in X7 that helps me do my job easier or quicker. It's frustrationg to have to go thru all these steps. We in jobs shops are time conscience and every new release is slowing us down. I am impressed at your skill at making complex software but I believe in the future Mastercam is going to get so complicated to use that many people will move on to other software. I also work on large parts and use stl models for other operations and this verify is garbage...Just my opion.

Can anyone help me with adding the tool "D" number to post at every G41 for the same tool.

Does anyone know of a addon that will give you GD&T symbols for dimensioning the drawings in solid layout.

Lars,

I have one that I loaded on the ftp.That has speeds,feeds, and time called Process Sheet.xls .

 

ftp://www.ppcadcam.com/Mastercam_forum/Te..._&_misc/Process Sheet.xls

how do you log on to the ftp site

5:40

WINDOWS XP PRO x64 SP2

Dell Precision T3400

Intel Core 2 Quad CPU Q6600 @2.40GHz

2.39GHz 4GB Ram

73GB 3Gbps SAS, 15K RPM Hard Drive

That is strange, sorry I was of no help.

Maybe try download MR2 service pack 1 and see if it clears up the problem

make sure your nc file name and program numbers are the same on all the toolpaths or they will post seperately.

thank you for the lead I'll check it out

X3 when using sub programs, can you control the O&P numbers assigned to the sub program?