BBIGOTON
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by BBIGOTON
-
-
Copy/paste between tool libraries worked great. However, when I copy tools from one library to another, the tool number changes. I would like to keeep the same tool number thru all machine groups. Is this possible?
-
Thanx gcode. Big help.
-
I'm having trouble carrying over tools when I move toolpaths from a 3axis machine group to a 5axis machine group.
Thanx in advance.
-
I dunno why but my control definition is not working. What I did do though was to add this line to cutter comp: toffno$ = t$ + 30.....that worked.
Alex
-
Kyle, John and Gcode, thank you for your suggestions but I must be doing something wrong because I changed the value in the control definition but nothing happened. I tried it out with a fanuc 3-axis and the mpmaster posts without luck. Any other suggestions?
Thanx guys.
Alex
-
Sorry guys, it's X3 and generic fanuc 3x post.
-
Sorry guys, it's X3 and generic fanuc 3x post.
-
I forgot to add that I tried this:
ptoolcomment #Comment for tool
tloffno$ = tloffno$ + 30 <-- I added this
tnote = t$, toffnote = tloffno$, tlngnote = tlngno$
if tool_info = 1 | tool_info = 3,
sopen_prn, pstrtool, sdelimiter, *tnote, sdelimiter, *toffnote, sdelimiter, *tlngnote, sdelimiter, *tldia$, sclose_prn, e$
But it didn't work, I got the right output #+30 only on the first output of every tool offset but the ones after went back to single digits.
Thanx for any help.
Alex
-
Does anyone know how to add to the diameter offset number. I'm trying to add 30 to my diameter offset. On V9 I used to be able to change it by changing the value on my set-up. I figured that by changing the number in the tool section of my control definition would do the trick but it didn't work. Can someone gim'me a hand?
%
O0001
*********************************
T1 - 3/4" ROUGH FLAT E.M. - 2-1/2" LG. - H1
T2 - 3/8" FINISH FLAT E.M. - 2" LG. - H2
T3 - 1/2" SPOTDRILL - H3
N100G20
N105G0G17G40G49G80G90
ROUGH LEFT END - RELIEF CUT
TOOL CHANGE
N110T1
N115M00
LOAD TOOL: 1
N120G0G90G54X-35.5822Y-1.8844S3750M3
N125G43H1Z4.M8
N130Z.1
N135G1Z-.635F75.
N140G41D1X-35.6706Y-1.796F30. <--want to add 30 to D value
N145X-35.8474Y-1.6192
N150G40X-36.589Y-.8777
N155Z-.535F100.
N160G0Z.25
N165X-35.5822Y-1.8844
N170Z-.535
N175G1Z-1.2699F75.
N180G41D1X-35.6706Y-1.796F30. <--want to add 30 to D value
N185X-35.8474Y-1.6192
N190G40X-36.589Y-.8777
N195Z-1.1699F100.
N200G0Z4.
ROUGH LEFT END - HALF
N205X-35.0731Y-1.7288
N210Z.1
N215G1Z-.635F75.
N220G41D1X-35.1615Y-1.6405F30. <--want to add 30 to D value
N225X-35.5151Y-1.2869
N230X-36.3271Y-.4748
N235G2X-36.625Y-.0843R.4049
N240G1Y.9693
N245G40Y1.1193
N250Z-.535F100.
N255G0Z.25
N260X-35.0731Y-1.7288
N265Z-.535
N270G1Z-1.2699F75.
N275G41D1X-35.1615Y-1.6405F30. <--want to add 30 to D value
N280X-35.5151Y-1.2869
N285X-36.3271Y-.4748
N290G2X-36.625Y-.0843R.4049
N295G1Y.9693
N300G40Y1.1193
N305Z-1.1699F100.
N310G0Z4.
N315M5
N320G91G28Z0.M9
N325M00
TOOL CHANGE
N330T2
N335M00
LOAD TOOL: 2
FINISH LEFT END - TOP
N340G0G90G54X-35.0961Y-1.3983S5000M3
N345G43H2Z4.M8
N350Z.1
N355G1Z-.635F75.
N360G41D2X-35.1845Y-1.3099F25. <--want to add 30 to D value
N365X-35.3613Y-1.1331
N370X-36.2103Y-.284
N375G3X-36.2382Y-.2709R.0457
N380G2X-36.4075Y-.0843R.1875
N385G1Y.9693
N390G40Y1.0943
N395Z-.535F100.
N400G0Z4.
N405X-35.0961Y-1.3983
N410Z-.535
N415G1Z-1.2699F75.
N420G41D2X-35.1845Y-1.3099F25. <--want to add 30 to D value
N425X-35.3613Y-1.1331
N430X-36.2103Y-.284
N435G3X-36.2382Y-.2709R.0457
N440G2X-36.4075Y-.0843R.1875
N445G1Y.9693
N450G40Y1.0943
N455Z-1.1699F100.
N460G0Z4.
FINISH LEFT END - BOTTOM
N465X-33.0961Y-3.3983
N470Z-1.1699
N475G1Z-1.6654F75.
N480G41D2X-33.1845Y-3.3099F25. <--want to add 30 to D value
N485X-33.3613Y-3.1331
N490X-36.2103Y-.284
N495G3X-36.2382Y-.2709R.0457
N500G2X-36.4075Y-.0843R.1875
N505G1Y.9693
N510G40Y1.0943
N515Z-1.5654F100.
N520G0Z4.
N525M5
N530G91G28Z0.M9
N535M00
TOOL CHANGE
N540T3
N545M00
LOAD TOOL: 3
SPOT 3/8-16 STI HOLES - HELICOILS - 11X
N550G0G90G54X-33.25Y0.S5000M3
N555G43H3Z4.M8
N560Z.1
N565G99G81Z-.2325R.1F30.
N570X-30.25
N575X-27.25
N580X-24.25
N585X-21.25
N590X-18.25
N595X-15.25
N600X-12.25
N605X-9.25
N610X-6.25
N615X-3.25
N620G80
N625Z4.
N630M5
N635G91G28Z0.M9
N640G28X0.Y0.
N645M30
%
Any help will be appreciated.
Alex
-
Does anyone know what the difference between G68 and G68.2 is?
I love these, they're cool.
I would like to thank you all for the great advice y'all provide.
- 1
-
I'm trying to mill a non-flat spline with a 3D contour toolpath, but, I get an error message "Entry: ramp contour, chamfer and 3D contour are not enabled. Upgrade to level 1 is required". I'm not sure what this means because we have level 3. Has this toolpath changed because I used this toolpath in v9 many times. Any help will be appreciated.
BB
VERIFY - RESTART
in Industrial Forum
Posted
X4 MU3
In previous versions, after verifing toolpaths with stock from a file, I would hit "restart", the rewind looking button, and I would get the verified model including the recent toolpath cuts.
Is there something I'm missing?
Any help will be appreciated.