Works fine here!!! Quadro 4000 video card.

.......

On 5/10/2017 at 1:03 PM, The Chipmaker said:

 Hello,

We are trying to peck tap on our Haas. The post seems right, but it goes to full depth without coming out of hole. I have the repeat rigid tap turned on in the machine control. Here is what the post looks like.

%
O0000
(PROGRAM NAME -  PECK TEST )
(DATE=  05-05-17  TIME=  09:04 )
N100 G0 G17 G20 G40 G49 G80 G90
(  RIGHT-HANDED TAP - 0.19   TOOL - 4  LEN. - 4  DIA. - .19 )
T4M6
N110 G0 G90 G54 X-17.25 Y3.75 S1920 M3
N120 M8
N130 G43 H4 Z.25
N140 M31
N150 G98 G84 Z-0.6875 R.1 Q.25 F60.
N310 G80
N320 M5
N330 M9
N340 G91 G28 Z0.
N350 G28 Y0. M33
N360 M30
%

1

1

Should look like this. Try it out

Take out all the z values and just leave the z value on the G84 line to final depth. It should peck then. Oh and put a "Q" on the G84 Line.

Works good here????

12 hours ago, jlw™ said:

So, i use dynamic A LOT.  Probably my favorite path.  Even when I use "conventional" feeds, speeds and depths cut I use dynamic because it will never bury a tool.

Any who, I usually end up breaking my geo up into multiple paths to get the "air" down.  Am I just missing the trick on this one?

2

You must select geometry in order for MAstercam to "sort" by selection. Just tried it and it works like a charm. Dont select solid chains.

I personally like the dell keyboards as well. They have a very nice "click" to them.