johan1johan1
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by johan1johan1
-
-
hello all
we are using Mcam 7 for some time now
and almost everthing is working good for us
we like the diffrents in 5-axis toolpath but
we have something we don't like
if we have toolpaths highlighted and turn the part
it will go away and come back as soon we stop to turn the part
do someone now if we could turn this feature off?
if we are using Mcam 6 it will show all time then we turn the part
-
Many purchased posts are quite close out of the box.
Some need some tweaking but once done the post should run the machine without issue.
The 3 companies I mentions ALL stand behind their final product and will make any necessary changes.
ICAM is a 3rd party, I can't say anything good or bad about them, I don't know their work
okey
thanks
johan
-
Depends, what machine/machines?
hi
thinking of 5-axis machine
will it run smooth?
-
Hello
Have anyone used their post?
are they good on building them or
should it be someother like inhouse or cimco?
best one is?
-
We dont have all of this bugs
and we are doing 5-axis 3-axis higspeed and we are also using this software to
program a lathe with Y-axis 2 turrents and a subspindle
so maybe i depends also what hardware that you are using?
we are using custom builds pc with intel a good workstation motherboard
alot of memory and win7-64
- 1
-
hi again
yes we have that switch in misc
and we had set 0 in it
i shall try with the points and see what
happens
we have also tryed to uing the limit in the post
but we dont get it to work
-
hi all
i try to do a program that are using our A-axis only
i want it to go from A-88 to A88 but when i
are around A0 the C-axis is turning 180 and
i go back to A-88
the thing is what it turns the C-axis i get
a dot after the mill
Mcam7
in Industrial Forum
Posted
hello
this is when I have them highlighted in ops manager and try to rotate the part
then I stop I will see them again
thanks for helping