nemat
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by nemat
-
-
how do you override geometry diameter in threadmilling?
-
how do you override geometry diameter in threadmilling?
-
why in threadmilling major dia. is not highlighted.
-
Hi everybody out there. please help me out if you could and the question is how do you translate the
geomery with the toolpath mulpiple times in mc9.1 or higher. thakns in advance.
nemat
-
Hi all, in mc9 or higher, how do you check your
geometry in toolpath to see if you are ok. anybody
can help, please.
thanks
nemat
-
when you chaging spline to arc, how could you get
the surface smoother. do you need to change the resolutions in mc9.1
thanks
nemat
-
how do you program in solid in x2 and lower version. any body
thanks
nemat
-
thanks mike that was very helpful.
nemat
-
I have problem with threadmillpost,it will pickup the cuttercomp on the arc, and the post was working before,don't know control defenition&machine defeintion are ok or not ,they were before, can anybody help me please.
regard
nemat
retired machinist
in Educational Forum
Posted
the major diameter is grayed like to override it.