Dan Tischler
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Dan Tischler
-
-
Greg,
We have two lathe seeds and toolpaths next does not bring up thread. We can only reach it from the operations Manager.
Our plotter is a Houston Insturments DMP-60 Series now TMS Plotter Specialists. We downloaded their md967 driver. We use this plotter for plotting 50X size layout sheets for use with Sheffield optical grinders. Its very close tolerance work so the layouts need to be right on. In MC6 we could dial in the exact 50X line lenghts using the streach factors. With both MC7 and 8 we can"t. We've talked to support a number times trying to pin point the problem.The gentleman in support we were working with left MC. So we're back at square one with alot of time in this this issue. The last we heard is that there is an issue with the software. Right now we would like to know if we can solve this problem with what we have.
Thanks,
Dan
-
In order to receive a file from our machines with the correct file # in MCV8
we have to send it to MCV8 twice. (I was told this problem would be solved
with an updated version in mid Sept.)? In lathe we don't seem to have a thread
option on the menu, and we also understand there are some issues with the
stretch factors concerning plotters. MC6 is the only version that works
correctly for our application. Are there issues being addressed or are there
fixes we are not aware of. Please advise.
Thanks Much,
Dan Tischler
-
New Posting
communications
in Industrial Forum
Posted
Thank You Gentlemen, the information is appreciated.
Dan