Good Morning, Pc robotic.

Thank you very much

Could you email me your creation about custom drill cycle for probe.

Thank you again.

All the best

[email protected]

Thanks for answer.

Yes, I use HAAS and FANUC.

[email protected]

Thanks for answer.

Yes, I use HAAS and FANUC.

Hello.

How to use custom drill cycle for renishaw probe.

Thanks in a forward.

Thanks

Hi, everybody.

How to use custom drill cycle to program macros for probe.

Thanks for help.

Thank you very much

I have it in absolute.

Good Morning.

I need to change something in my lathe postprocessor to get right drill cycle in a program but I do not know what. Please look to my pics.

Thanks.

Thanks, everybody. All right.

OK

FORMATE STATMENT.NC

Thank you very much , but it does not work for me.

Good, Morning.

Please help.

How to change fanuc post to have B0. B90. and on without of points like B0, B90

Thanks for any help 

Good Morning, everybody.

What is a System Requirements for Master cam 2017

Thanks in a forward.

Thank you very much Ron.

This is really helpful.

Good Morning.

Today I go back to high speed machining. (dynamic mill, peel mill and so on)  Please give me an advise about feed and percentage of side material removing.

Tank you for any help.

IIRC File >> Settings in verification window.

Thank you very much

IIRC File >> Settings in verification window.

Good Afternoon.

Please help!!! I'm trying verify my tool path and  receive message to decrease collision tolerance. How to do this???

Thanks.

Just repeated what you did and did not get any problem with tread mill and single point thread mill. Everything works fine.

I had this problem using betta version. Now I do not have any delay.

Hi all,

 

X+ for X9 PC1 is ready.

 

Download

 

- Support for new Tools (Barrel tool, Threading tool)

- 'Stock' as parameter is available

 

Attention:

It uses the same configuration files & folders like in X8.

So make a copy of your configurations before installing it or they may be overwritten.

"C:\Users\Public\Documents\X+\*.*"

 

Please let me know if anything is not working.

 

Greetings,

Günther

Good Morning.

What's X+? How it works? How to install?

Thanks.

Hello to everybody.

How X+ works? What is it? How to install and use.

Thanks.

I'm not sure. May be my attachment will be helpful.

You are in trouble how exactly? Did you tell someone you were a world class expert on the Renishaw probing and how to use it in Mastercam and now you need to delivery on those promises?

 

You put up no sample file, no posted code nothing about your machine. We have no clue if you even have a Mastercam certified post for the machine you are probing for. Have you used the basic Renishaw probing routines before? The Mastercam process outputs everything unless you go into the configuration and have it only output the needed macro syntax. You talked about a tool here the probe does not set a tool a tool touch setter does that so losing me when you talking about tool setting. If you are talking about tool adjustments to offsets after checking features on the part those are all controlled in the probing process, but that is total different that setting a tool. If you are trying to make diameter adjustments on machined features then you have to make sure you are using the correct probing routine for that and again you have provided very little for us to see the who, what, where, when and why or what you are trying to accomplish here. Imagine you are trying to explain this to someone 1000 os miles away who #1 can not read your mind. #2 cannot see what you are doing #3 cannot figure out what you are doing since what you have explained is limited. Explain it better, provide a ton more information and maybe someone can help you limp along until you get proper training from your Mastercam dealer which is what I always recommend when using the Renishaw product.

Thank you very much for replay.

I have NEVER told anybody, I am world class expert. My biggest problem is my pure english. Because of it ,sometimes, I'm not too clear and I cannot give any more explanation then I've given.

I just can say, I use HAAS VF-2 with spindle and table probe, and send zip2go file with just three tools. If you can give me a help with example, I'd be very happy. If no it's OK too.

Thank you in a forward.PROBE.Z2G