I appreciate all your efforts thanks but changing the bolded 1's doesn't make a difference with MPLFAN.PST output

finally worked I found it in an old version 9 post 1- add this sub to the post p360_max_index #------- control the c axis output not to exceed 360 degrees [ while cabs > 360, cabs = cabs - 360 while cabs < zero, cabs = cabs + 360 while cabs = 360, cabs = 0 cabs = abs(cabs) ] 2- and call it within pfcout and pcout pfcout #Force C axis output p360_max_index . . . pcout #C axis output p360_max_index . . . thanks for you all

changing the setting in the MD doesn't make a difference with the same MPLFAN.PST Many thanks

yes, a lathe with a full C-axis C axis turns more than 360 degrees

hi, there can anybody help me controlling the limit of c axis output not to exceed 360 degrees a c-axis face contour toolpath outputs the following code in MastercamX3 N2320 X53.672 C360. N2330 X53.669 C360.224 N2340 X53.659 C360.447 N2350 X53.643 C360.67 N2360 X53.62 C360.892 N2370 X53.591 C361.114 I don't want the C output to exceed 360 degrees where can I do that in the MPLFAN.PST post or at any place the attachment contains the toolpath thanks