How sholud be set ,my are set min travel limit -360000.0 , max travel limit 360000.0, and axis supports continonus positionig , type :signed continonus, but if I changed to :signed direction,absolute angel (0-360) and post give me something like this and still with the same problem: X229.402 A--358.087 X228.761 A--358.265 X228.119 A--358.443 X227.477 A--358.621 X226.836 A--358.799 X226.194 A--358.977 X225.552 A--359.155 X224.91 A--359.333 X224.269 A--359.511 X221.855 A--360.18 If I changed travel limits min to 0 and max to 360 i have error 'warning -rotary limits exceeded. A--395.313 F430 X229.629 A-393.156 F300 X245.672 A-388.706

Hello everyone. I've just small problem with my post and would like to get l help. What I should change in my post to get post program for 4 axis toolpat with "A axis, with degree between 0-360" Below is the fragment of my program and my problem,I hope is clear. X175.724 Z18.303 A356.668 X176.007 Z18.352 A357.966 X176.288 Z18.411 A359.258 in this part A axis should start from 0 X176.569 Z18.479 A360.544 F971 X176.569 Z18.479 A361.544 F971 Thanks for help. Raf