-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Jeff Little
-
-
check out the attached screen shots
are you defining your stock stl file on the Backplot Veriify Options page??
Yes, tried it multiple times
-
I usually make a "Base Stock" Stock Model OP for start. In your case, you can extrude a solid, as I made on level 100 for stock.
Then you good to go in verify also. No need to play with STL files from outside. Just as I don't like too...
Its the exact same with stock model..... this is driving me crazy
-
Got a file you can share? I use all types of shapes in the New Verify and they have come in just fine.
Here ya go... i couldent upload the stl it said im not permitted to upload this type of file. You should be able to save some and then select save as stl.
Thank you
-
Michael - dumb question, but have you imported your STL to make sure that the file is correct in the first place?
Aaron,
I got ahold of my reseller and he also was stumped . My stock shows up under initial stock but when i toggle stock on and off it shows as a block. I have my stl set as stock in both machine group stock setup and verify option in the operations manager. We cut alot of extrusion here so a solid block is no beuno for verify. (I know the stl file is correct because it works just fine in x6) I attached a pic of whats going on the yellow is what i need the stock to show up as but the pink is what its coming out as.
-
Michael,
try unchecking "initial stock" and checking "stock" instead.
and ..
please ditch the CAP LOCK its considered yelling Thanks
I have already tried checking stock. When i check stock it shows up as a box rather than my the stl i generated. I also created a stock model and tried using it as well, same problem....
-
hOW CAN I USE AN STL AS MY STOCK INSTEAD OF A BOX IN X7? I HAVE MY STOCK SET TO FILE AND THE RIGHT STL IN BOTH STOCK SETUP AND VERIFY OPTIONS! I CAN SEE THE STOCK UNDER INITIAL STOCK BUT THE CUTTER JUST PASSES RIGHT THROUGH. IF THIS IS AN UPGRADE IM CANCELING MY MAINTENANCE THE SOFTWARE JUST SEEMS TO BE GETTING WORSE ):
Saving a useable STL file out of X7 Verify
in Industrial Forum
Posted
Haha!! success! thank you so much.