steven mileskie
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by steven mileskie
-
-
I am having trouble getting depth cuts to work in the multiaxis roughing. when I define the stock model and use constant I get an error unable to create plane
-
Thanks RobRick, is the only way it will define stock is through stock definition? Currently I have my settings from floor will it only define depth cuts if its from ceiling?
-
I am trying to use the depth cut option on x8 multisurface rough. I got the toolpath to work but so far have only been able to get the first and last cut to work and haven't been able to get the depth cuts I am looking for which is .075 x 14 times. Thanks in advance.
- 1
5-axis toolpath recommendation
in Industrial Forum
Posted
In the multiaxis rough I also have a toolpath I am using it on. The backplot looks great my issue is no matter what I try I cannot get the depth cuts to work it will only do the two passes I put into the first and last cut. I have tried multiple ways of getting the depth cuts to work, constant step, number of slices but it seems no matter what I do I get the same results any help would be great.