BARRY DURLING
-
Posts
3 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by BARRY DURLING
-
-
Thanks for the replies, so these are set in the Post Processor for that machine or in the tool parameters
-
How to use Master cam to program an old Haas CNC tool room Lathe.
There is no turret and it homes to the top right and not left and the
X and Z are opposite new machines with travel directions. Z is the same
but X plus come towards the operator and minus goes towards the back of the machine.- 1
How to Program an Old toolroom Haas Lathe with Mastercam
in Industrial Forum
Posted