-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Ekii
-
-
In the machine definition try setting the minimum travel limit to -360 and the maximum travel limit to 0 for that axis.
If i do this - i see "ROTARY LIMITS EXCEEDED (CANCEL TO EXIT)"
-
Hi all ! How output direction in mpmaster , I need negative
rot_cw_pos : 0 #Axis signed dir, 0 = CW positive, 1 = CCW positive
with rot_type : 1 #Rotary type - 0=signed continuous, 1=signed absolute, 2=shortest direction
-
Thanks for the answer Crazy^Millman & Reece L Gibson
-
1st guess you used a WCS or you set your substitution wrong. Put up a Mastercam file and not code alone and someone can better help you solve your problem. Let us help you with this problem.
Welcome to the forum.
This is file
-
Hello to all
How output C axis. I do 2d contour 2 on 2 inch when - in rotary axis control - rotary type - 3 axis - rotate about Z axis - in backplot all good, but nc code wrong
I use Generic Fanuc 5X Milll.
What i do wrong
Mpmaster direction
in Post Processor Development Forum
Posted
Sorry I made a mistake