So I got the g83 to post now but no "Z" or "Q" value this is for the lathe here is the string in the post and no G80 to cancel! ldrill$ #Canned drill cycle, lathe pdrlcommonb pcan1, pbld, n$, *sgdrlref,*sgdrill, pgdrlout, pzout, pxout, pyout, prdrlout, dwell$, pffr, strcantext, e$ pcom_movea pcanceldcl (TOOL - 6 OFFSET - 6) (LTR.J DRILL) ( PRE DRILL FOR .285 DIAMETER ) G28 G54 G0 T0606 G97 S750 M03 G0 X0. Z.1 G83 R.1 F.002 G28 U0. W0. M05 T0600 M30 %

I needed it asap and since it is the holidays and everyone else is on holiday vacation, that don't help, but thanks, for the input!

Hell there I am wondering how to turn on the G83 i checked the control defination and all the canned cycles are checked, here is the post i am recieve, and if I use a mill turn post it post a G74, I am using just a regular 2 axis slant bed lathe and I dont want to sift thru all the past post processors, it worked before but now it is gone, thanks in advance. Chris Here is what is being posted! (TOOL - 6 OFFSET - 6) (LTR.J DRILL) ( PRE DRILL FOR .285 DIAMETER ) G28 G54 G0 T0606 G97 S750 M03 G0 X0. Z.1 CUSTOMIZABLE DRILL CYCLE X0. Z.1 G28 U0. W0. M05 T0600 M30