cpulido1
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by cpulido1
-
-
I needed it asap and since it is the holidays and everyone else is on holiday vacation, that don't help, but thanks, for the input!
-
Hell there I am wondering how to turn on the G83 i checked the control defination and all the canned cycles are checked, here is the post i am recieve, and if I use a mill turn post it post a G74, I am using just a regular 2 axis slant bed lathe and I dont want to sift thru all the past post processors, it worked before but now it is gone, thanks in advance.
Chris
Here is what is being posted!
(TOOL - 6 OFFSET - 6)
(LTR.J DRILL)
( PRE DRILL FOR .285 DIAMETER )
G28 G54 G0 T0606
G97 S750 M03
G0 X0. Z.1
CUSTOMIZABLE DRILL CYCLE X0. Z.1
G28 U0. W0. M05
T0600
M30
G83 will not post on generic lathe default post
in Post Processor Development Forum
Posted
So I got the g83 to post now but no "Z" or "Q" value this is for the lathe here is the string in the post and no G80 to cancel!
ldrill$ #Canned drill cycle, lathe
pdrlcommonb
pcan1, pbld, n$, *sgdrlref,*sgdrill, pgdrlout, pzout, pxout, pyout,
prdrlout, dwell$, pffr, strcantext, e$
pcom_movea
pcanceldcl
(TOOL - 6 OFFSET - 6)
(LTR.J DRILL)
( PRE DRILL FOR .285 DIAMETER )
G28 G54 G0 T0606
G97 S750 M03
G0 X0. Z.1
G83 R.1 F.002
G28 U0. W0. M05
T0600
M30
%