dracksed
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by dracksed
-
-
Hi,
I am trying to transfer Macros with USB key into my AWEA 3016 using FANUC 31i controller. I successfully transfer 10 programs and when I try to transfer this following program into the CNC_MEMORY, instead of showing TRANFER COMPLETED, it wrote FILE NOTE FOUND. All the other programs that I transfered also looks like this, but this one I can't tranfer it, I don't understand.
%
O2102
#32=#25
#33=#26
G65P2001 X#1 Y#2 Z#3
G65P2003 A#1 B#2 C#3 D#4 E#5 F#3 K1. Q#21 R#17 S#18 T#19
#1=#[#17]
#2=#[#18]
IF[ABS[#23]LT0.0001]GOTO01
DPRNT[RAW*POINT*#1[44]***#2[44]***#3[44]]
N01
IF[ABS[#15]LT0.0001]GOTO02
#27=#14+#16
G65P2001 Z#27
G65P2001 X#6 Y#7
G65P2001 Z#3
GOTO03
N02
G65P2001 X#6 Y#7 Z#3
N03
G65P2003 A#6 B#7 C#3 D#8 E#9 F#3 K1. Q#21 R#17 S#18 T#19
#6=#[#17]
#7=#[#18]
IF[ABS[#23]LT0.0001]GOTO04
DPRNT[RAW*POINT*#6[44]***#7[44]***#3[44]]
N04
IF[ABS[#15]LT0.0001]GOTO05
#27=#14+#16
G65P2001 Z#27
G65P2001 X#10 Y#11
G65P2001 Z#3
GOTO06
N05
G65P2001 X#10 Y#11 Z#3
N06
G65P2003 A#10 B#11 C#3 D#12 E#13 F#3 K1. Q#21 R#17 S#18 T#19
#10=#[#17]
#11=#[#18]
IF[ABS[#23]LT0.0001]GOTO07
DPRNT[RAW*POINT*#10[44]***#11[44]***#3[44]]
N07
IF[ABS[#15]LT0.0001]GOTO08
#27=#14+#16
G65P2001 Z#27
N08
IF[ABS[#24]LT0.0001]GOTO999
G65P2016 A#1 B#2 C#6 D#7 E#10 F#11 X#17 Y#18 Z#20
#25=#[#17]
#26=#[#18]
#27=#14
IF[ABS[#32]LT0.0001]GOTO09
#28=#1-#25
#29=#2-#26
GOTO10
N09
#28=#25-#1
#29=#26-#2
N10
#30=0
#31=SQRT[[#28*#28]+[#29*#29]]
#28=#28/#31
#29=#29/#31
#[#17]=#1
#[#18]=#2
#[#19]=#3
G65P2013 A#28 B#29 C0 I#17 J#18 K#19
#1=#[#17]
#2=#[#18]
#3=#[#19]
IF[ABS[#32]LT0.0001]GOTO11
#28=#6-#25
#29=#7-#26
GOTO12
N11
#28=#25-#6
#29=#26-#7
N12
#31=SQRT[[#28*#28]+[#29*#29]]
#28=#28/#31
#29=#29/#31
#[#17]=#6
#[#18]=#7
G65P2013 A#28 B#29 C0 I#17 J#18 K#19
#6=#[#17]
#7=#[#18]
IF[ABS[#32]LT0.0001]GOTO13
#28=#10-#25
#29=#11-#26
GOTO14
N13
#28=#25-#10
#29=#26-#11
N14
#31=SQRT[[#28*#28]+[#29*#29]]
#28=#28/#31
#29=#29/#31
#[#17]=#10
#[#18]=#11
G65P2013 A#28 B#29 C0 I#17 J#18 K#19
#10=#[#17]
#11=#[#18]
G65P2016 A#1 B#2 C#6 D#7 E#10 F#11 X#17 Y#18 Z#20
IF[ABS[#33]GT0.0001]GOTO15
#[#20]=#[#20]*2.
N15
#[#19]=#14
N999
M99
%
Simple mpfan.pst modification
in Post Processor Development Forum
Posted
Hi everyone,
I tried to find the information on the forum directly, but it doesn't seem to be there. Feel to correct me if I am wrong.
We have an AXYZ cnc router and I would like to modify the post to get rid of some outputs that is not necessary for our machine.
Here's the features I would like to remove:
Rotary Axis
Tool Number
Tool Change
tool Height
Here's an example of an NC output (I put in red what I would like to remove):