circa.411
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by circa.411
-
-
Hello, first I would like to say hello to all of you mastercam gurus.
I have couples of years of experience in programming lathe and 3 axis mill but I do not have a lot of experience in post processor editing.
I looked on the emastercam website and on google, and I didn't find any help to solve my problem.
I have a problem posting an "initial height" before my drilling cycles.
I inserted the parameter "initht$" before my drilling cycles in my post and it is posting the initial height i have programmed in mastercam (in this case 4") BUT it post the term "initht$" too...
AND it doesn't have the Z axis term before...
I have mastercam X5, mill 3 axis, OKUMA osp7000m control
With osp7000m I do need to have a G71 Z*** BEFORE I call my drilling cycle
Here is how my program look right now:
( NO. 7 DRILL | TOOL - 90 )
N110 M6
T199
G0 G90 X.8494 Y.9317 S5000 M3
G56 H90 Z4.
G71 initht$ 4. M8
M53 G81 Z-1. R.1 F72.98
G80
M9
M5
G30 P01
Here is how I would like my prog. to look like:
( NO. 7 DRILL | TOOL - 90 )
N110 M6
T199
G0 G90 X.8494 Y.9317 S5000 M3
G56 H90 Z4.
G71 Z4. M8 -----------------------------------------------Z4. refering to the initial height
M53 G81 Z-1. R.1 F72.98
G80
M9
M5
G30 P01
Here is my post processor:
pdrill$ #Canned Drill Cycle
pdrlcommonb
pbld, "G71", initht$, "M8", e$
pcan1, pbld, "M53", *sgdrill, pxout, pyout, pfzout,
prdrlout, dwell$, *feed, strcantext, e$
pcom_movea
I tryed a lot of parameters and term combination but nothings work...
Your help would be really appreciated
Thanks a lot !
Problem with Initial Height in post processor
in Post Processor Development Forum
Posted
Well.. I will try a little more by myself, then I'll call my dealer I guess...