Badboys
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Badboys
-
-
I have now managed to get it working, well sort of. The only problem is that it is in block form and not stick, and from what I can see there is no option to change it.
-
ok I did that and it saved it as a HTM file so I'm still not sure if it has downloaded correctly, also where do I transfer the file too ?
sorry about this but I'm not great when it comes to computers
-
thanks for that, i did try to download it but for some reason it wont let me it comes up with a page full of random figures/letters etc
-
Does anybody know where we can get a copy of drawing symbol font's from. We are creating op sketches so it would be very handy to use. We are currently using version X9.
- 3
-
Thanks that's worked well
-
Has anybody managed to use block geometry for their stock setup on a lathe, we have tried to use it but when we go into verify it is still round bar.
-
I believe there were some on the FTP site
I don't suppose you got the link by any chance
-
Does anyone know where the best place to get more c-hooks. We know there are some supplied with the software and we have looked on here but wondered if there were any more somewhere else.
-
Hi Guys,
We need to dimension a part and machine it in MasterCAM from the STL file but can’t do it without a solid or surfaces to create the toolpath from; I know you can do some toolpaths from the polygonal mesh but not any 2D toolpaths.
-
Can someone advise me on how to convert an STL file to a surface or a solid
Drawing symbol's
in Industrial Forum
Posted
ok thanks