Seems like we always go back to Cimcool, best for us, no rust, no-stink, just really works well for us.

I use analyze entity properties to extend, shorten or re-position a line, won't extend an arc although, but will re-locate it or change the radius. 

   Morning,

             Just wanting to post here that my company is putting up a very nice machine for sale. the reason we are selling is in our area we are not having

luck finding profitable work for this machine, and very badly need the room to add other machines which we doing very well.

        I should have attached here more info, and you can contact me if wanting more information. Absolutely no crashes or bumps, do have some special tooling 

Which is not listed.

Thanks

  Russell

VTM quote_2014_okuma_vtm-2000yb.pdf

Thank you guys very much it was in the Verisurf settings JP.

Have a great day

     Morning all,

           Some way I got this Gnomon stuck on my screen and I just can't figure how to get off. I think I did this with something in Verisurf  WCS Tools? This thing comes up

even when starting a new file, and is really in my way.  I have attached a screen shot I hope

  Thanks for any help

Try this one I ran a repair in Solidworks

RR-COMPLETED 2017 RAINIER.mcam

Top left File click stl

Thank you Ole dependable JP and Ernie

 Morning, I think this come up when I installed Verisurf for 2018, just can't figure out how to remove it, do even know what in world it would be use for?

Thanks

Thank you JP so you do have to use another program to add, I was thinking it was done in Mastercam

Thanks Have a Great Weekend

Russell

      Trying to alter our setup sheets and have a question I can't find anything I can understand (I did look in here found one but it kind of went all over).

 My question in (cajun lingo)  "How you put them comments on the front page of setup sheets"

Thanks for any help.

   Also It's Friday as we say down here "Let the meat ball roll Sha"

Russell

I would set a new plane with your surface solid, then use just contour milling and turn C axis in rotation, and to your new plane

  May not be the place for this, but last 2 or 3 days Emastercam on my work computer loads very very slow, also when navigating the site is the same.

My lap top at home is almost instant.

Can anyone give me suggestions on what to try on this thing without me have to contact out IT people. I did clear the cashe, etc. but no difference .

Thanks

Russell

I see no need to put in XYZ. just type for example -1 for X enter (don't type X-1) or -1 -1 for XY (don't type X-1, -Y1)

To me same as X9?

Genos are very sweet machines

Thanks to all for the help.

  huskermcdoogle,  Knowledgebase with the points w/ our post work perfect.

Thank you again Russell 

Thank you AJ, I see what you did and it works fine, only thing it's still posting all Identical "A moves" ???

I tried with the Okuma post and the HAAS post and all the same moves??

Thanks

Russell

Thanks Jeff, I'll see what stock will do?

   Morning,

    Looked but couldn't find info I needed.

   The sample file attached is a simple example of my issues, simple contour on a 4" OD round, then transformed for a total of 4 cuts. MC looks fine, but when I post all 4 locations are at the same angles,

  Thank you for any help

Russell

T.mcx-9

   I haven't seen one of those in probably 20 or 25 years or longer, can't remember, but was glad to see the larger hexes especially 1/4". 

Try a .step, or stp file

Thanks Ron for the reply,

we'll figure it out

Russell

  Morning,

    I hope I can re post this thing again?

  Here is our real problem, our Okuma Multis is not a full 5 axis, or the B axis has to be in a fixed position and can't move simultaneous with the other axis. 

     We've been trying to run it as a fixed B angle with 4 axis, just tried all different ways, did a contour the tried a convert to 5 axis but just too dumb to get it to work.

       Can this be done?

   If I need to post another file I can.

  Thanks

Russell

Thank you so much Josh and Ron, looks like 2017 is the ticket,  ya'll make it look easy.

Thanks again

Russell

Yes we have all the modules please do this for us

Thank you