Who has the project templates for VS2012?

I found only for VS2013 and VS2015.

The idea was to eliminate the intermediate steps on a single axis movements (X and Z)

Hello,

Can I eliminate steps from the middle customizing the postprocessor?

ex:

From

...

G0 Z4.

G1 X100.9 F.14 M8

G1 X60.033

G1 X46.617

G1 X22.545

G2 X-2.4 Z5. R78.284

...

To

...

G0 Z4.

G1 X22.545 F.14 M8

G2 X-2.4 Z5. R78.284

...

Thank you

Hello,

Does someone tried to combine the roll and project a text on a curve (radius + line) in C-Hook or NET-Hook project?

Select the machine, define the stock, select the VPlane and TPlane, select a chain(s) define a tool, define an operation, attach the tool to operation, generate the G-Code.

There are examples for lathe usage using C-Hook?

Hello,

There are examples for lathe usage using NET-Hook?

Best regard,

Iulian

You can use any text editor to modify the g-code BUT you must be very careful and know what you are doing because you can destroy the machine.

You can try Notepad++(open source) or CIMCOEdit(exists in Mastercam)

Hi Karl,

   KVM (Keyboard, Video and Mouse) is used to share a monitor, keyboard and mouse to more that 2 PC.

IMHO if you want use the masterCam dongle you have to manually change it between computers or use a network license server.

If you have a KVM with USB ports for keyboard and mouse ... you can leave the mouse receiver it KVM switch.

Iulian

I am interested in XForm translate, rotate and roll

Hi,

How do I select all the geometry (arcs, lines and points) in CHooks?

I want to move the entire geometry in another place.

Thanks

Iulian

What number?

Thank you!

The videos are unavailable.

Can you repost them?

Thanks, it works.

Iulian

Hi!

I am creating a new tool

--------------------------

// create tool
EndMillSphericalTool tool = new EndMillSphericalTool();
tool.Name = "Frontal Numbering Tool";
tool.Number = 1;
tool.Length = 50;
tool.FluteLength = 25;
tool.ShoulderLength = 30;
tool.Diameter = 1;
tool.Flutes = 4;
tool.Commit();

------------------------

After running the program in Tool Manager appears a new tool but it is a drill. The dimensions are from above.

Why?

Linked to arc data:

I have a drawing in the ZY Plane (Right Side).

All the line have line.Data.Point1.x=0, line.Data.Point1.y<>0, line.Data.Point1.z<>0,  but arc.Data.CenterPoint.x<>0, arc.Data.CenterPoint.y<>0, arc.Data.CenterPoint.z=0

Why?

I use Mastercam X7 Net-Hook3.0 C# 2013