Thank you so much!

I have tried but did not work work I and J. I still get I-3.4351 & J-1.6154 I have changed only these lines fmt "X" 2 xabs #X position output -> fmt "X" 10 xabs #X position output fmt "Y" 2 yabs #Y position output -> fmt "Y" 10 yabs #Y position output fmt "I" 3 iout #Arc center description in X -> fmt "I" 10 iout #Arc center description in X fmt "J" 3 jout #Arc center description in Y -> fmt "J" 10 jout #Arc center description in Y Do I need to change anything else or am I doing something wrong because I did not get result? Thanks for your time!

Hello, I am having problem with the programs which are made in master cam x6 for wire machine. I was wondering if is possible to make programs on two decimals( 5.42) instead of four (5.4210). If is possible, what I need to change. I am asking because I could not find it in the program. I could find but it is only related to drawing. I suppose I need to change some values in MPWFANUC.pst part of code where word decimal is mentioned. I am not sure is the part of code posted below right, I am guessing: # -------------------------------------------------------------------------- # Format statements - n=nonmodal, l=leading, t=trailing, i=inc, d=delta # -------------------------------------------------------------------------- #Format statements fs2 1 0.7 0.6 #Decimal, absolute, 7 place, default for initialize ( fs2 2 0.5 0.4 #Decimal, absolute, 5/4 place fs2 3 0.5 0.4d #Decimal, delta, 5/4 place #Common format statements fs2 4 1 0 1 0 #Integer, not leading fs2 5 2 0 2 0l #Integer, force two leading fs2 6 3 0 3 0l #Integer, force three leading fs2 7 4 0 4 0l #Integer, force four leading fs2 9 0.1 0.1 #Decimal, absolute, 1 place fs2 10 0.2 0.2 #Decimal, absolute, 2 place fs2 11 0.3 0.3 #Decimal, absolute, 3 place fs2 12 0.4 0.4 #Decimal, absolute, 4 place fs2 13 0.5 0.5 #Decimal, absolute, 5 place fs2 14 0.3 0.3d #Decimal, delta, 3 place fs2 15 0.2 0.1 #Decimal, absolute, 2/1 place fs2 16 1 0 1 0n #Integer, forced output # These formats used for 'Date' & 'Time' fs2 18 2.2 2.2lt #Decimal, force two leading & two trailing (time2) fs2 19 2 0 2 0t #Integer, force trailing (hour) fs2 20 0 2 0 2lt #Integer, force leading & trailing (min) I have uploaded .txt file of whole post processor code. Any help is appreciated. Thanks in advance MPWFANUC.txt