R.M.V.
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by R.M.V.
-
-
Hi Colin,
As you told me, i found this line in my "pwrtt$" post block,
if tool_table = 1, ptooltable
I inserted "t$>0" into this line,
if tool_table = 1 & t$ > 0, ptooltable
and it post perfectly,
% O0005(CAMERA) (DATE=JAN,02,2015 TIME=18:40) (OKUMA-OSP200M) (T17|5. SPOT DRILL |H17|D17) (T9|10.5 DRILL |H9|D9) (T50|10. FLAT END MILL |H50|D50) (T41|10. FLAT END MILL |H41|D41)
Thanks a lot sir.
-
Hi,
I have a problem with my Tooltable Output.
It shows as,
%
O0005(CAMERA)
(DATE=JAN,02,2015 TIME=02:20)
(OKUMA-OSP200M)
(T17|5. SPOT DRILL |H17|D17)
(T9|10.5 DRILL |H9|D9)
(T50|10. FLAT END MILL |H50|D50)
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T-50|10. FLAT END MILL |H50|D50)========> Don't need this line !
(T41|10. FLAT END MILL |H41|D41)
(T-41|10. FLAT END MILL |H41|D41)========> Don't need this line !
(T-41|10. FLAT END MILL |H41|D41)========> Don't need this line !
(T-41|10. FLAT END MILL |H41|D41)========> Don't need this line !I only need one line of each tool. But i think because i used multiple pass, it posts like this. Can anyone help me with this? Thanks in advance.
Tooltable Output Problem
in Post Processor Development Forum
Posted
Hi Colin,
Thanks for the info.